BS Mechanical Engineering Flow Chart 2 | ME-EM

For students with math placement below calculus.

Audit Years

Program Code EME

This sample plan and flow chart is suitable for all incoming students with math placement below calculus:

Flow Chart 2 version March 2022

General Flow Chart Guidelines

Not an Official List

134 total credits (including CH 1000, plus 3 units of co-curricular activities). This flow chart is not an official list of degree requirements. Adjustments may be required due to curriculum changes. This is a sample course plan only. All required courses are offered each fall and spring semester. Students may take courses in any semester as long as pre-requisites are met.

General Education Requirements

24 total credits. Required courses are UN1015-Composition (3 credits), UN 1025-Global Issues (3 credits), a Critical and Creative Thinking course (3 credits), a Social Responsibility and Ethical Reasoning course (3 credits), and 12 HASS (Humanities, Arts, and Social Sciences) credits. The 12 total credits of HASS must include a minimum of 3 credits each in Communication/ Composition, Humanities/Fine Arts and Social and Behavioral Science. Approved course lists are available in the ME Advising Center and are linked on the ME Advising webpage. 6 credits must be 3000 level or higher (does not include EC 3400). EC 3400 is not a HASS course for ME students, but is still required for the BSME. No more than 3 credits may be used from the HASS Restricted List. All 3000 level or higher HASS courses require UN 1015 and UN 1025 as non-concurrent prerequisites.

UN 1025 Global Issues Language Option

3 credits of 3000-level or higher modern language may be substituted directly for UN 1025. A list of approved courses is located on the Modern Language webpage. Any students with previous language experience in Spanish, French, or German must take the Modern Language Online Placement Test. Instructions are linked on the ME Advising webpage

Engineering Fundamentals

ENG 1002 or passing the online spatial visualization test is required for ENG 1101 as a concurrent pre-requisite. ENG 1002 or passing the spatial visualization test is also a pre-requisite (non-concurrent) for ENG 1102. MA 1032/1031 is a concurrent pre-requisite for ENG 1101. MA 1160/1161 is a concurrent pre-requisite for ENG 1102. ENG 1102 project content varies by section number.

Math

Students are placed into an initial math course based on ACT/SAT math score, the online ALEKS assessment, or a math placement exam score for credit (AP, IB, CLEP). Students with MA 1030 (3 credits) math placement must complete MA 1030 before moving on to MA 1031 (3 credits). MA 1032 (4 credits) or MA 1031 (3 credits) are pre-requisites for MA 1160/1161 for students with lower math placement than Calculus I. MA 1160 (4 credits), or MA 1161 (5 credits) satisfy the Calculus I requirement. MA 2320 and MA 3520 are offered as full semester courses for students taking these courses in separate semesters. The Math department also teaches MA 2321 as an accelerated course (equivalent to MA 2320) in the first half of a given semester and MA 3521 as an accelerated course (equivalent to MA 3520) in the second half of the semester (registration must be for the same section number of both MA 2321 and MA 3521 in the same semester). MA 2320, MA 2321, or MA 2330 are all equivalent and are approved pre-requisites for MA 3520 or MA 3521. MA 3530 or 3560 are also equivalent to MA 3520/3521. Both MA 2710 and 2720 are acceptable in place of MA 3710. A grade of ‘C’ or better in MA 2160 is required as a pre-requisite for MEEM 2110 and MEEM 2201.

Co-curricular Activities

Mainly physical education courses with some additions. Three units (or six half units) are required for graduation. These units will be included as earned hours and may be used to determine full-time enrollment status. These are in addition to the 128 total credits required for the BSME. Co-curricular list is available in the ME Advising Center and is linked on the ME Advising webpage. These units are graded pass/fail and are not included in credit hours used for calculation of any grade point averages (cumulative, engineering, or departmental).

Prerequisite Courses

The prerequisite course must be successfully completed prior to taking the subsequent course. Concurrent prerequisites - noted with a (C) - may be taken at the same time, although it is not necessary to take these courses together if the prerequisite course is completed first.

The prerequisites for MEEM 4901 are: EE 3010 (concurrent), MA 2710/2720/3710 (concurrent), MEEM 3400, MEEM 3600 (concurrent), MEEM 3201, MEEM 3750, MEEM 3901, and MEEM 3911.
For the Fall 2021, Spring 2022, and Summer 2022 semesters, students will be allowed to take MEEM 3201 and/or MEEM 3750 concurrently with MEEM 4901. Both courses must be passed to move on to MEEM 4911. Starting in Fall 2022, all students must have already passed MEEM 3201 and MEEM 3750 to begin MEEM 4901.
The prerequisites for MEEM 4911 are: EE 3010, MA 2710/2720/3710, MEEM 3201, MEEM 3600, MEEM 3750, and MEEM 4901.

Co-requisite Courses

Co-requisite courses are courses that must be taken together in the same semester.

Transfer, Advanced Placement, or Study Abroad Courses

Transfer, Advanced Placement, or study abroad courses are not included in credit hours used for GPA calculations. Transfer credit is awarded for Michigan Tech equivalent course work only if a grade of ‘C’ or better (2.00/4.00) or equivalent is earned at a transfer institution. Study abroad credit will be awarded based on passing a course according to equivalent international standards. Advanced Placement credit is awarded according to published AP Exam score standards (also IB and CLEP).

Semester 1

UN 1015 - Composition

Provides direct instruction in composition. Students examine and interpret communication practices and apply what they learn to their own written, aural, and visual compositions. Class projects ask students to communicate in a variety of modes and to attend to audience, purpose, and context.

Credits: 3.0
Lec-Rec-Lab: (0-3-0)
Semesters Offered: Fall, Spring, Summer
Restrictions: Must be enrolled in one of the following Class(es): Freshman

CH 1000 - Introductory Chemistry

Introduces fundamental concepts of chemistry to students who are interested in how chemical processes shape the world. Covers fundamental chemical concepts and integrates applications of chemistry that are relevant to the global community. High school chemistry is not required.

Credits: 3.0
Lec-Rec-Lab: (0-3-0)
Semesters Offered: Fall

UN 1025 - Global Issues

Study of contemporary global issues, their origins, impacts, and solutions through the thematic and comparative exploration of worldview and culture, population, globalization, development, politics and global governance, environment, and sustainability. Emphasis on global literacy and information literacy.

Credits: 3.0
Lec-Rec-Lab: (3-0-0)
Semesters Offered: Fall, Spring, Summer
Restrictions: Must be enrolled in one of the following Class(es): Freshman

MA 1032 - Precalculus

This course examines the behavior of linear, polynomial, rational, exponential, logarithmic and trigonometric functions.

Credits: 4.0
Lec-Rec-Lab: (0-4-0)
Semesters Offered: Fall, Spring, Summer
Pre-Requisite(s): ALEKS Math Placement >= 61 or ACT Mathematics >= 22 or SAT MATH SECTION SCORE-M16 >= 540

ENG 1101 - Engineering Analysis and Problem Solving

An introduction to the engineering profession and to its various disciplines. Focuses on developing problem-solving skills, computational skills, and communication skills. Through active, collaborative work, students work on teams to apply the engineering problem-solving method to "real-world" problems.

Credits: 3.0
Lec-Rec-Lab: (0-0-5)
Semesters Offered: Fall, Spring, Summer
Pre-Requisite(s): (MA 1031(C) or MA 1032(C) or MA 1120(C) or MA 1160(C) or MA 1161(C) or MA 1121(C) or MA 2160(C) or MA 3160(C)) and (Spatial Visualization Score >= 19 or ENG 1002(C))

Total 16 Credits
PE Co-Curricular (0.5)

Semester 1 Notes

UN 1025 is a general education requirement. One semester of 3000 level or higher language course can replace UN 1025. A list of approved courses is located on the Modern Language webpage. Any students with previous language experience in Spanish, French, or German must take the Modern Language Online Placement Test. Instructions are linked on the ME Advising webpage.
Take MA 1032 Precalculus or MA 1031 College Algebra II with Trigonometry.
CH 1000 is only offered in fall semesters. See an academic advisor regarding chemistry placement if you are unsure of the right chemistry course to start in.
MA 1032 or MA 1031 will satisfy the free elective requirement.
ENG 1101 has MA 1032 or MA 1031 as a concurrent pre-req.
Students with math placement in MA 1030 should contact an academic advisor.

Semester 2

CH 1150 - University Chemistry I

Introduces the foundations of chemistry, including electronic structure of atoms and molecules, intermolecular forces, states of matter, chemical reactions, organic chemistry, chemical equilibria, kinetics, and acid-base chemistry. Includes laboratory component that emphasizes lecture components.

Credits: 3.0
Lec-Rec-Lab: (3-0-0)
Semesters Offered: Fall, Spring, Summer
Co-Requisite(s): CH 1151
Pre-Requisite(s): MA 1031(C) or MA 1032(C) or MA 1120(C) or MA 1160(C) or MA 1161(C) or MA 1135(C) or MA 1121(C) or ALEKS Math Placement >= 56 or CEEB Calculus AB >= 2 or CEEB Calculus BC >= 2 or CEEB Calculus AB Subscore >= 2 or ACT Mathematics >= 22 or SAT MATH SECTION SCORE-M16 >= 540

CH 1151 - University Chemistry Lab I

Laboratory to accompany CH1150.

Credits: 1.0
Lec-Rec-Lab: (0-0-3)
Semesters Offered: Fall, Spring, Summer
Co-Requisite(s): CH 1150
Pre-Requisite(s): MA 1031(C) or MA 1032(C) or MA 1120(C) or MA 1160(C) or MA 1161(C) or MA 1135(C) or MA 1121(C) or ALEKS Math Placement >= 56 or CEEB Calculus AB >= 2 or CEEB Calculus BC >= 2 or CEEB Calculus AB Subscore >= 2 or ACT Mathematics >= 22 or SAT MATH SECTION SCORE-M16 >= 540

PH 1100 - Physics by Inquiry I

Experiments covering kinematics, force, conservation of momentum, conservation of energy, and waves are explored through guided construction. The course emphasizes understanding physical concepts through inquiry and the scientific method

Credits: 1.0
Lec-Rec-Lab: (0-0-2)
Semesters Offered: Fall, Spring, Summer
Pre-Requisite(s): MA 1160(C) or MA 1161(C) or MA 1121(C)

MA 1161 - Calculus Plus w/ Technology I

An introduction to single-variable calculus, which includes a computer laboratory. Topics include trigonometric, exponential, logarithmic functions, differentiation and its uses, and basic integration. Integrates symbolic tools, data and numerics, and graphical concepts and is similar to MA1160, going at a different pace.

Credits: 5.0
Lec-Rec-Lab: (0-4-1)
Semesters Offered: Fall, Spring, Summer
Pre-Requisite(s): MA 1032 or MA 1031 or MA 1120 or ALEKS Math Placement >= 76 or CEEB Calculus AB >= 2 or CEEB Calculus BC >= 2 or CEEB Calculus AB Subscore >= 2 or ACT Mathematics >= 26 or SAT MATH SECTION SCORE-M16 >= 610

ENG 1102 - Engineering Modeling and Design

Continuation of ENG1101. Introduction to the engineering design process with an emphasis on graphics and documentation. Focuses on engineering problem solving in the context of the design process.

Credits: 3.0
Lec-Rec-Lab: (0-0-5)
Semesters Offered: Fall, Spring, Summer
Pre-Requisite(s): (MA 1031 or MA 1032 or MA 1120 or MA 1160(C) or MA 1161(C) or MA 1121(C) or MA 2160(C) or MA 3160(C)) and (ENG 1101 or (ENG 1001 and ENG 1100)) and (Spatial Visualization Score >= 19 or ENG 1002)

3 Credits of Critical/Creative Thinking

See University General Education Requirements. Select one course from the Core: Critical and Creative Thinking list.

Total 16 Credits
PE Co-Curricular (0.5)

Semester 2 Notes

CH 1150 and CH 1151 are co-requisites.
MA 1032 or MA 1031 is a pre-requisite for MA 1161 for students with math placement below calculus.
MA 1161 is a concurrent pre-requisite of PH 1100.
ENG 1102 has MA 1161 as a concurrent pre-req and ENG 1101 as a pre-requisite.

Semester 3

MSE 2100 - Introduction to Materials Science and Engineering

Introduction to the structure, processing, properties, and performance of engineering materials, including metals, polymers, glasses, ceramics, and composites. Topics include material selection in design, material processing in manufacturing, and structural material failure mechanisms.

Credits: 3.0
Lec-Rec-Lab: (3-0-0)
Semesters Offered: Fall, Spring, Summer
Pre-Requisite(s): CH 1112 or CH 1122 or (CH 1150 and CH 1151) or (CH 1160 and CH 1161)

PH 2100 - University Physics I-Mechanics

A calculus-based introduction to classical mechanics. Topics include kinematics, Newton's laws, impulse and momentum, work and energy, and the universal law of gravitation. C or better/AP credit in Calc 1 or co-requisite registration in PH2110 required.

Credits: 3.0
Lec-Rec-Lab: (3-0-0)
Semesters Offered: Fall, Spring, Summer
Pre-Requisite(s): PH 1100(C) and (MA 1160 or MA 1161 or MA 1121 or MA 1135) or (CEEB Calculus AB >= 3 or CEEB Calculus BC >= 3 or CEEB Calculus AB Subscore >= 3 and MA 2160(C) or MA 3160(C))

MA 2160 - Calculus with Technology II

Continued study of calculus, which includes a computer laboratory. Topics include integration and its uses, function approximation, vectors, and elementary modeling with differential equations.

Credits: 4.0
Lec-Rec-Lab: (0-3-1)
Semesters Offered: Fall, Spring, Summer
Pre-Requisite(s): MA 1160 or MA 1161 or MA 1135 or MA 1121 or CEEB Calculus AB >= 3 or CEEB Calculus BC >= 3 or CEEB Calculus AB Subscore >= 3

MA 2320 - Elementary Linear Algebra

An introduction to linear algebra and how it can be used. Topics include systems of equations, vectors, matrices, orthogonality, subspaces, and the eigenvalue problem.

Credits: 2.0
Lec-Rec-Lab: (0-2-0)
Semesters Offered: Fall, Spring, Summer
Restrictions: May not be enrolled in one of the following Major(s): Mathematics, Software Engineering, Computer Science
Pre-Requisite(s): MA 1160 or MA 1161 or MA 1135 or MA 1121

Total 12 Credits
PE Co-Curricular (0.5)

Semester 3 Notes

For students earning a ‘CD’ or ‘D’ grade in MA 1160/1161, PH 2110 (University Physics Workshop 1) is a required co-requisite for PH 2100.
PH 2100 has PH1100 as a concurrent pre-requisite and MA 1160 or MA 1161 as a pre-requisite.
'C' or better in MA 2160 is required to enroll in MEEM 2110 and MEEM 2201. MA 1160 or MA 1161 is a pre-requisite for MA 2160.
MA 2320 has MA 1160 or MA 1161 as a pre-requisite.
MA 2320, MA 2321, or MA 2330 are all equivalent and are approved prerequisites for MA 3520 or MA 3521. MA 3530 or 3560 are also equivalent to MA 3520/3521.
MA 2320 and MA 3520 are offered as full semester courses for students taking these courses in separate semesters. The Math department also teaches MA 2321 as an accelerated course (equivalent to MA 2320) in the first half of a given semester and MA 3521 as an accelerated course (equivalent to MA 3520) in the second half of the semester (registration must be for the same section number of both MA 2321 and MA 3521 in the same semester).
MSE 2100 has CH 1150 and CH 1151 as pre-requisites.

Semester 4

PH 1200 - Physics by Inquiry II

Experiments covering Coulomb's law, electric and magnetic fields, circuits, induction, and geometric optics are explored through guided construction. The course emphasizes understanding physical concepts through inquiry and the scientific method.

Credits: 1.0
Lec-Rec-Lab: (0-0-2)
Semesters Offered: Fall, Spring, Summer
Pre-Requisite(s): PH 1100 or PH 1111 or PH 1141 or PH 1161

MEEM 2201 - Introductory Thermodynamics

This course introduces concepts of energy, energy conversion, mechanisms of heat and work transfer in processes and in cycles. It also covers the first and the second laws of thermodynamics.

Credits: 3.0
Lec-Rec-Lab: (0-3-0)
Semesters Offered: Fall, Spring, Summer
Restrictions: Must be enrolled in one of the following College(s): College of Engineering
Pre-Requisite(s): MA 2160 and CH 1150 and CH 1151

MA 3160 - Multivariable Calculus with Technology

Introduction to calculus in two and three dimensions, which includes a computer laboratory. Topics include functions of several variables, partial derivatives, the gradient, multiple integrals; introduction to vector-valued functions and vector calculus, divergence, curl, and the integration theorems of Green, Stokes, and Gauss.

Credits: 4.0
Lec-Rec-Lab: (0-3-1)
Semesters Offered: Fall, Spring, Summer
Pre-Requisite(s): MA 2160 or CEEB Calculus BC >= 3

MEEM 2110 - Statics

Force systems in two and three dimensions. Includes composition and resolution of forces and force systems, principles of equilibrium applied to various bodies, simple structures, friction, centroids, and moments of inertia. Vector algebra used where appropriate. Prerequisite of MA2160 with a grade of C or better is required.

Credits: 3.0
Lec-Rec-Lab: (0-3-0)
Semesters Offered: Fall, Spring, Summer
Restrictions: Must be enrolled in one of the following College(s): College of For Res & Env Sci, College of Engineering
Pre-Requisite(s): MA 2160

MEEM 2901 - Mechanical Engineering Practice I

Students develop laboratory and computer skills, Topics include product dissection, data acquisition, materials testing, 2D finite element modeling, 1D modeling and simulation.

Credits: 2.0
Lec-Rec-Lab: (0-1-3)
Semesters Offered: Fall, Spring, Summer
Restrictions: Must be enrolled in one of the following Major(s): Mechanical Engineering
Pre-Requisite(s): MEEM 2110(C) and ENG 1102 and UN 1015

3 Credits of Social Reso. / Ethical Reasoning

See University General Education Requirements. Select one course from the Core: Social Responsibility and Ethical Reasoning list.

Total 16 Credits
PE Co-Curricular (0.5)

Semester 4 Notes

MA 3160 and MEEM 2110 and MEEM 2201 have MA 2160 as a pre-requisite. MEEM 2110 and MEEM 2201 both require a C or better in MA 2160.
MEEM 2901 has ENG 1102 and UN 1015 as pre-requisites. MEEM 2110 is also a concurrent pre-requisite of MEEM 2901.
MEEM 2201 also has CH 1150 and CH 1151 as pre-requisites.
PH 1200 has PH 1100 as a pre-requisite.

Semester 5

PH 2200 - University Physics II-Electricity and Magnetism

A calculus-based introduction to electromagnetism. Topics include Coulomb's law, electric fields, Gauss's law, electric potential, capacitance, circuits, magnetic forces and fields, Ampere's law, induction, Maxwell's equations, and electromagnetic waves.

Credits: 3.0
Lec-Rec-Lab: (3-0-0)
Semesters Offered: Fall, Spring, Summer
Pre-Requisite(s): (PH 1200(C) or PH 2261(C)) and (PH 2100 or PH 1160) and MA 2160

MA 3520 - Elementary Differential Equations

First order equations, linear equations, and systems of equations.

Credits: 2.0
Lec-Rec-Lab: (0-2-0)
Semesters Offered: Fall, Spring, Summer
Restrictions: May not be enrolled in one of the following Major(s): Mathematics, Computer Science
Pre-Requisite(s): MA 2160 and (MA 2320 or MA 2321 or MA 2330)

MEEM 2700 - Dynamics

First course in the principles of dynamics, covering the motion of a particle, the kinematics and kinetics of plane motion of rigid bodies, the principles of work and energy, impulse and momentum. Uses vector methods.

Credits: 3.0
Lec-Rec-Lab: (0-3-0)
Semesters Offered: Fall, Spring, Summer
Pre-Requisite(s): PH 2100 and (MEEM 2110 or ENG 2120)

MEEM 2150 - Mechanics of Materials

Introduction to mechanical behavior of materials, including stress/strain at a point, principle stresses and strains, stress-strain relationships, determination of stresses and deformations in situations involving axial loading, torsional loading of circular cross sections, and flexural loading of straight members. Also covers stresses due to combined loading and buckling of columns.

Credits: 3.0
Lec-Rec-Lab: (0-3-0)
Semesters Offered: Fall, Spring, Summer
Restrictions: Must be enrolled in one of the following College(s): College of For Res & Env Sci, College of Engineering
Pre-Requisite(s): MEEM 2110

MEEM 2911 - Mechanical Engineering Practice II

Students further develop testing and simulation skills as they validate dynamic mechanical and thermal/fluid systems. Course emphasizes application of energy conservation principles to physical engineering systems as well as analysis and communication of data.

Credits: 3.0
Lec-Rec-Lab: (0-2-3)
Semesters Offered: Fall, Spring, Summer
Restrictions: Must be enrolled in one of the following Major(s): Mechanical Engineering
Pre-Requisite(s): MEEM 2901 and MEEM 2201(C) and MEEM 2110

Total 14 Credits
PE Co-Curricular (.5)

Semester 5 Notes

PH 2200 has PH2100 and MA 2160 as pre-requisites. PH 1200 is a concurrent pre-requisite of PH 2200.
MA 2320, MA 2321, or MA 2330 are all equivalent and are approved prerequisites for MA 3520 or MA 3521. MA 3530 or 3560 are also equivalent to MA 3520/3521.
MA 3520/3521 also has MA 2160 as a prerequisite.
MA 2320 and MA 3520 are offered as full semester courses for students taking these courses in separate semesters. The Math department also teaches MA 2321 as an accelerated course (equivalent to MA 2320) in the first half of a given semester and MA 3521 as an accelerated course (equivalent to MA 3520) in the second half of the semester (registration must be for the same section number of both MA 2321 and MA 3521 in the same semester).
MEEM 2700 has PH 2100 and MEEM 2110 as prerequisites.
MEEM 2150 has MEEM 2110 as a prerequisite.
MEEM 2911 has MEEM 2110 and MEEM 2901 as prerequisites and MEEM 2201 as a concurrent pre-requisite.
MEEM 2911 is a concurrent pre-requisite of MEEM 3901 (may be taken together if other MEEM 3901 pre-requisites are met). MEEM 3901 is a concurrent pre-requisite for MEEM 3911 (may be taken together), but
MEEM 2911 is a pre-requisite for MEEM 3911 (cannot take all 3 courses - MEEM 2911/3901/3911 - all together in the same semester).

Semester 6

MEEM 3201 - introductory Fluid Mechanics & Heat Transfer

Course emphasizes internal flow and modes of heat transfer: control volume analysis of mass, momentum and energy, pipe and duct flow, dimensional analysis, steady and unsteady heat conduction, internal convection and application of boundary conditions, and simple heat exchanger design.

Credits: 4.0
Lec-Rec-Lab: (0-4-0)
Semesters Offered: Fall, Spring, Summer
Restrictions: Must be enrolled in one of the following Major(s): Mechanical Engineering
Pre-Requisite(s): MEEM 2201 and MEEM 2911 and MA 3160

MA 3710 - Engineering Statistics

Introduction to the design, conduct, and analysis of statistical studies aimed at solving engineering problems. Topics include methods of data collection, descriptive and graphical methods, probability and probability models, statistical inference, control charts, linear regression, design of experiments.

Credits: 3.0
Lec-Rec-Lab: (0-3-0)
Semesters Offered: Fall, Spring, Summer
Pre-Requisite(s): MA 2160 or MA 3160(C)

MEEM 3400 - Mechanical System Design and Analysis

In this course, students learn mechanical synthesis and analysis methods. They use case studies to develop relationships between design and performance. They apply synthesis methods to the design of a new product.

Credits: 3.0
Lec-Rec-Lab: (0-3-0)
Semesters Offered: Fall, Spring, Summer
Restrictions: Must be enrolled in one of the following Major(s): Robotics Engineering, Mechanical Engineering
Pre-Requisite(s): (ENG 2120 or MEEM 2150) and MEEM 2700

MEEM 3901 - Mechanical Engineering Practice III - Model Based Design

Students apply the engineering design process by combining engineering science with simulation tools to guide design decisions. They use energy-based models to determine design direction and design-based simulation to select and optimize components and subsystems to meet design requirements.

Credits: 2.0
Lec-Rec-Lab: (0-1-3)
Semesters Offered: Fall, Spring, Summer
Restrictions: Must be enrolled in one of the following Major(s): Mechanical Engineering
Pre-Requisite(s): MEEM 2911(C) and MEEM 2150 and MEEM 2700

3 Credits of Composition / Communication

HASS Electives

See University General Education Requirements. Select one course from the Communication and Composition List.

Total 15 Credits
PE Co-Curricular (.5)

Semester 6 Notes

MEEM 3201 has MA 3160, MEEM 2911, and MEEM 2201 as prerequisites.
MA 3710 has MA 2160 as a prerequisite. MA 2710and MA 2720 are also equivalent to MA 3710 for mechanical engineering.
MEEM 3400 has MEEM 2700 and MEEM 2150 as prerequisites.
MEEM 3901 has MEEM 2700 and MEEM 2150 as prerequisites. MEEM 2911 is a concurrent pre-requisite of MEEM 3901 (may be taken together if other MEEM 3901 pre-requisites are met). MEEM 3901 is a concurrent pre-requisite for MEEM 3911 (may be taken together), but MEEM 2911 is a pre-requisite for MEEM 3911 (cannot take all 3 courses - MEEM 2911/3901/3911 - all together in the same semester).

Semester 7

MEEM 3750 - Dynamic Systems

This course deals with the modeling, analysis and control of mixed physics systems. It covers differential equation generation for mechanical, thermal, and electrical systems, their simulation, and methods for analyzing their performance operating in both open and closed loop.

Credits: 4.0
Lec-Rec-Lab: (0-4-0)
Semesters Offered: Fall, Spring, Summer
Restrictions: Must be enrolled in one of the following Major(s): Mechatronics, Mechanical Engineering
Pre-Requisite(s): MEEM 2700 and (MA 3520 or MA 3521 or MA 3530 or MA 3560)

MEEM 3600 - Introduction to Manufacturing

This course introduces manufacturing processes, including deformation, subtractive, additive, and molding processes. Students learn how things are made in both low and high production environments. It includes design for manufacturing considerations.

Credits: 3.0
Lec-Rec-Lab: (0-2-2)
Semesters Offered: Fall, Spring
Restrictions: Must be enrolled in one of the following College(s): College of Engineering
Pre-Requisite(s): MEEM 2150 and MSE 2100

EE 3010 - Circuits and Instrumentation for Cyber Physical Systems

Designed for nonmajors. Covers the principles of electrical and electronic measurements, including dc, ac, semiconductor devices, amplifiers, and filtering.

Credits: 3.0
Lec-Rec-Lab: (2-0-2)
Semesters Offered: Fall, Spring, Summer
Restrictions: May not be enrolled in one of the following Major(s): Electrical Engineering, Computer Engineering
Pre-Requisite(s): MA 1121 or MA 1160 or MA 1161

MEEM 3911 - Mechanical Engineering Practice IV

Students create simulations and validation procedures to verify that components and assembled system meet desired requirements. Experimental methods, simulation, data processing, comparing experimental and analytical results, and engineering communication methods are emphasized.

Credits: 3.0
Lec-Rec-Lab: (0-2-3)
Semesters Offered: Fall, Spring
Restrictions: Must be enrolled in one of the following Major(s): Mechanical Engineering
Pre-Requisite(s): MEEM 2911 and MEEM 3901(C)

3 Credits of HASS: Humanities and Fine Arts

HASS Electives

See University General Education Requirements. Select one course from the Humanities and Fine Arts List.

Total 16 Credits

Semester 7 Notes

At least 6 credits of tech electives must be MEEM course numbers (exceptions below) for students starting Fall 2019 or later.

Semester 8

6 Credits of Technical Electives

See Technical Electives below.

3 Credit of HASS: Social and Behavioral Sci

HASS Electives

See University General Education Requirements. Select one course from the Social and Behavioral Science List.

EC 3400 - Economic Decision Analysis

Studies economic decision-making for actions occurring over time. Covers decision tools for comparing alternatives, public project evaluation, risk and uncertainty, mutually exclusive decisions, multiple objective decisions, interest rate calculations, cash flow analysis, depreciation and taxes, cost of capital, capital budgeting.

Credits: 3.0
Lec-Rec-Lab: (3-0-0)
Semesters Offered: Fall, Spring, Summer
Restrictions: May not be enrolled in one of the following Major(s): Engineering Management, Marketing, Management, Management Information Systems, Accounting, Finance; May not be enrolled in one of the following Class(es): Freshman, Sophomore
Pre-Requisite(s): UN 1015 and (UN 1025 or Modern Language - 3000 level or higher)

MEEM 4901 - Senior Capstone Design I

Students work in teams on "open-ended" engineering capstone design projects - most with industrial sponsors - developing original and creative solutions to real engineering problems.

Credits: 2.0
Lec-Rec-Lab: (0-0-6)
Semesters Offered: Fall, Spring
Restrictions: Must be enrolled in one of the following Major(s): Mechanical Engineering
Pre-Requisite(s): MEEM 3400 and EE 3010(C) and MEEM 3600(C) and MEEM 3901 and MEEM 3201 and MEEM 3750 and MEEM 3911 and MA 3710(C)

Total 14 Credits

Semester 8 Notes

EC 3400 has UN 1015 and UN 1025 as prerequisites.
MEEM 4901 has MEEM 3201, MEEM 3400, MEEM 3750, MEEM 3901, and MEEM 3911 as pre-requisites and EE 3010, MA 3710, and MEEM 3600 as concurrent pre-requisites.
At least 6 credits of tech electives must be MEEM course numbers (exceptions below).

Semester 9

9 Credits of Technical Electives

See Technical Electives below.

3 Credits of Any HASS / HASS Restricted

HASS Electives

See University General Education Requirements. Select one course from any HASS list (including the HASS Restricted List).

MEEM 4911 - Senior Capstone Design II

Design projects started in MEEM4901 are completed and evaluated using computer-aided engineering methods, physical models, and/or prototypes as appropriate.

Credits: 2.0
Lec-Rec-Lab: (0-0-6)
Semesters Offered: Fall, Spring
Restrictions: Must be enrolled in one of the following Major(s): Mechanical Engineering
Pre-Requisite(s): EE 3010 and MEEM 3201 and MEEM 3600 and MEEM 3750 and MEEM 4901

Total 14 Credits

Semester 9 Notes

At least 6 credits of tech electives must be MEEM course numbers (exceptions below).
MEEM 4911 has EE 3010, MA 3710, MEEM 3201, MEEM 3600, MEEM 3750, and MEEM 4901 as prerequisites.

Electives

Required Technical Electives

Any 4000+ level courses in the College of Engineering except MET courses are acceptable for ME technical electives. MET courses are not acceptable for ME technical elective credits. These prefixes—BE, CM, CEE, EE, ENG, GE, MEEM, MSE—may be used by BSME students for technical elective credits (if allowed to enroll in the course by the offering department) with the following exceptions:

BE 4000 - Independent Study

Students undertake an independent study under the guidance of a Biomedical Engineering faculty member. The course of study may either be research or academic and is decided upon between the student and faculty member.

Credits: variable to 6.0; Repeatable to a Max of 12
Semesters Offered: Fall, Spring, Summer
Restrictions: Permission of instructor and department required

BE 4900 - Biomedical Design Fundamentals

Design considerations and professional practice issues are addressed. Ethics, regulatory affairs, and intellectual property are addressed within the context of the biomedical engineering profession. Modern tools of biomedical design are presented and applied to current problems.

Credits: 2.0
Lec-Rec-Lab: (2-0-0)
Semesters Offered: Spring
Restrictions: Must be enrolled in one of the following Class(es): Junior, Senior

BE 4901 - Biomedical Design Project I

Team approach is used to resolve a defined problem in biomedical engineering. Projects are selected and undertaken with faculty guidance and sponsor input. Must be senior project ready, as defined by major, substitutes for prerequisites.

Credits: 2.0
Lec-Rec-Lab: (0-1-3)
Semesters Offered: Fall
Restrictions: Must be enrolled in one of the following Major(s): Biomedical Engineering; May not be enrolled in one of the following Class(es): Freshman, Sophomore, Junior
Pre-Requisite(s): BE 3350 and BE 3700 and BE 3701 and BE 3800 and BE 4900

BE 4910 - Biomedical Design Project II

Continuation of Biomedical Design Project I (BE4901) under faculty guidance. Emphasizes design and testing of prototypes. Requires work project notebooks, oral and written reports, and presentations.

Credits: 2.0
Lec-Rec-Lab: (0-1-3)
Semesters Offered: Spring
Restrictions: May not be enrolled in one of the following Class(es): Freshman, Sophomore, Junior
Pre-Requisite(s): BE 4900 and BE 4901

BE 4930 - Biomedical Engineering Topics

Biomedical engineering courses will be offered on new or emerging technical subjects depending on student demand and faculty interest and expertise.

Credits: variable to 6.0; May be repeated
Semesters Offered: Fall, Spring, Summer
Restrictions: May not be enrolled in one of the following Level(s): Graduate

BE 5000 - Biomedical Masters Research

Includes the study of an acceptable biomedical engineering problem and the preparation of a report or thesis.

Credits: variable to 12.0; May be repeated; Graded Pass/Fail Only
Semesters Offered: Fall, Spring, Summer
Restrictions: Must be enrolled in one of the following Level(s): Graduate

BE 5900 - Biomedical Engineering Masters Topics

Biomedical engineering courses will be offered as professional electives dependent upon the interest of the faculty.

Credits: variable to 6.0; May be repeated
Semesters Offered: Fall, Spring, Summer
Restrictions: Must be enrolled in one of the following Level(s): Graduate

BE 5930 - Biomedical Engineering Topics

Biomedical engineering courses will be offered on new or emerging technical subjects depending on student demand and faculty interest and expertise.

Credits: variable to 6.0; May be repeated
Semesters Offered: Fall, Spring, Summer
Restrictions: Must be enrolled in one of the following Level(s): Graduate

CEE 4510 - Baccalaureate Thesis

Independent baccalaureate research project performed under the supervision of one or more faculty.

Credits: 3.0
Lec-Rec-Lab: (0-3-0)
Semesters Offered: Fall, Spring
Restrictions: Permission of instructor required; May not be enrolled in one of the following Class(es): Freshman, Sophomore, Junior

CEE 4900 - Engineering Design Project I

An engineering design project related to civil and environmental engineering. Not available to students who have taken CE4905. Students must complete both CE4900 and CE4910 to fulfill senior design requirements. Must be senior project ready as defined by major department.

Credits: 3.0
Lec-Rec-Lab: (0-2-2)
Semesters Offered: Fall, Summer
Restrictions: May not be enrolled in one of the following Class(es): Freshman, Sophomore, Junior

CEE 4905 - Engineering Design Project

An engineering design project related to civil and environmental engineering. Not available to students who have taken CE4900 or CE4910. (Senior project ready as defined by major substitutes for prerequisites)

Credits: 3.0
Lec-Rec-Lab: (0-2-2)
Semesters Offered: Fall, Spring, Summer
Restrictions: Permission of instructor required; May not be enrolled in one of the following Class(es): Freshman, Sophomore, Junior

CEE 4910 - Engineering Design Project II

Continuation of CE4900. Not available to students who have taken CE4905. Students must complete both CE4900 and CE4910 to fulfill senior design requirements. Senior project ready as defined by major substitutes for prerequisites.

Credits: 3.0
Lec-Rec-Lab: (0-2-2)
Semesters Offered: Spring, Summer
Pre-Requisite(s): CE 4900 or CEE 4900

CEE 4915 - International Engineering Field Experience

An engineering design project that incorporates an international experience. Must be taken in conjunction with CE4916 in order to fulfill senior design requirements. Must be senior project ready as defined by major department.

Credits: 3.0
Lec-Rec-Lab: (0-2-2)
Semesters Offered: Fall, Spring, Summer
Restrictions: Must be enrolled in one of the following Class(es): Senior

CEE 4916 - International Senior Design Field Project

An engineering design project that incorporates an international experience. Must be taken in conjunction with CE4915 in order to fulfill senior design requirements. Senior project ready as defined by major substitutes for prerequisites.

Credits: 3.0
Lec-Rec-Lab: (0-2-2)
Semesters Offered: Fall, Spring, Summer
Restrictions: Must be enrolled in one of the following Class(es): Senior
Pre-Requisite(s): CE 4915 or CEE 4915

CEE 4920 - Civil Engineering Independent Study

Approved research or design project in civil engineering, originating with an individual student or assigned by the instructor.

Credits: variable to 3.0; Repeatable to a Max of 3
Semesters Offered: Fall, Spring, Summer
Restrictions: Permission of instructor required; May not be enrolled in one of the following Class(es): Freshman, Sophomore

CEE 4930 - Environmental Engineering Independent Study

Approved research or design project in environmental engineering, originating with an individual student or assigned by the instructor.

Credits: variable to 3.0; Repeatable to a Max of 3
Semesters Offered: Fall, Spring, Summer
Restrictions: Permission of instructor required; May not be enrolled in one of the following Class(es): Freshman, Sophomore

CEE 4990 - Special Topics in Civil and Environmental Engineering

Topics of special interest in civil or environmental engineering.

Credits: variable to 3.0; Repeatable to a Max of 9
Semesters Offered: Fall, Spring, Summer

CEE 5190 - Special Topics in Civil Engineering Materials

Advanced study of materials related topics, including discussions of recent research developments at an advanced level.

Credits: variable to 3.0; Repeatable to a Max of 6
Semesters Offered: Fall, Spring, Summer

CEE 5250 - Special Topics in Structural Engineering

Advanced study of structural engineering topics, including discussions of recent research developments at an advanced level. Topics might include loading analysis, advanced topics in steel design, composite materials for structures, and behavior of a variety of reinforcements for concrete applications.

Credits: variable to 3.0; Repeatable to a Max of 6
Semesters Offered: Fall, Spring, Summer
Restrictions: Must be enrolled in one of the following Level(s): Graduate

CEE 5390 - Special Topics in Construction Engineering

Advanced study of construction engineering topics including discussion of recent research developments.

Credits: variable to 3.0; Repeatable to a Max of 6
Semesters Offered: Fall, Spring, Summer

CEE 5490 - Special Topics in Transportation Engineering

Topics of special interest in transportation engineering.

Credits: variable to 3.0; Repeatable to a Max of 6
Semesters Offered: Fall, Spring, Summer
Restrictions: Permission of instructor required

CEE 5560 - Advanced Topics in Air Quality Engineering

Advanced study of topics related to atmospheric chemistry and/or modeling the transformation and transport of atmospheric pollutants.

Credits: variable to 4.0; Repeatable to a Max of 8
Semesters Offered: Fall, Spring, Summer
Restrictions: Permission of instructor required

CEE 5561 - Advanced Topics in Biological Processes

Advanced study of biological processes associated with natural and engineering systems.

Credits: variable to 4.0; Repeatable to a Max of 8
Semesters Offered: Fall, Spring, Summer
Restrictions: Permission of instructor required

CEE 5562 - Advanced Topics in Physical-Chemical Processes

Advanced study of physical and chemical processes that occur in natural and engineered systems.

Credits: variable to 4.0; Repeatable to a Max of 8
Semesters Offered: Fall, Spring, Summer
Restrictions: Permission of instructor required

CEE 5563 - Advanced Topics in Surface Water Quality Engineering

Advanced topics related to understanding the biogeochemistry of surface waters (lakes, rivers, wetlands) and the mathematical modeling of those systems.

Credits: variable to 4.0; Repeatable to a Max of 8
Semesters Offered: Fall, Spring, Summer
Restrictions: Permission of instructor required

CEE 5590 - Special Topics in Environmental Engineering

Advanced study of environmental engineering topics including discussion of recent research developments.

Credits: variable to 3.0; Repeatable to a Max of 6
Semesters Offered: Fall, Spring, Summer

CEE 5690 - Special Topics in Water Resources

Advanced study of water resources topics including discussion of recent research developments.

Credits: variable to 3.0; Repeatable to a Max of 6
Semesters Offered: Fall, Spring, Summer

CEE 5890 - Special Topics in Geotechnical Engineering

Advanced study of geotechnical engineering topics including discussion of recent research developments.

Credits: variable to 3.0; Repeatable to a Max of 6
Semesters Offered: Fall, Spring, Summer
Restrictions: Must be enrolled in one of the following Level(s): Graduate

CEE 5920 - Civil Engineering Independent Study

Approved research or design project in civil engineering, originating with an individual student or assigned by the instructor.

Credits: variable to 3.0; Repeatable to a Max of 6
Semesters Offered: Fall, Spring, Summer
Restrictions: Permission of instructor required; Must be enrolled in one of the following Level(s): Graduate

CEE 5930 - Environmental Engineering Independent Study

Approved research or design project in environmental engineering, originating with an individual student or assigned by the instructor.

Credits: variable to 3.0; Repeatable to a Max of 6
Semesters Offered: Fall, Spring, Summer
Restrictions: Must be enrolled in one of the following Level(s): Graduate

CEE 5990 - Civil Engineering Graduate Seminar

Detailed study and group discussions of current literature and graduate research projects related to the broad field of civil engineering. Topics will be combined to address the student's area of interest, including construction, environmental, geotechnical, structures, transportation, and water resources. External speakers discuss current related issues.

Credits: 1.0
Lec-Rec-Lab: (0-1-0)
Semesters Offered: Fall, Spring
Restrictions: Must be enrolled in one of the following Level(s): Graduate

CEE 5991 - Environmental Engineering Graduate Seminar I

Presentations and discussion of current literature and research related to the broad field of environmental engineering.

Credits: 1.0
Lec-Rec-Lab: (0-1-0)
Semesters Offered: Fall
Restrictions: Must be enrolled in one of the following Level(s): Graduate; Must be enrolled in one of the following Major(s): Engineering - Environmental, Environmental Engrg Science, Civil Engineering, Environmental Engineering

CEE 5992 - Environmental Engineering Graduate Seminar II

Presentations and discussion of current literature and research related to the broad field of environmental engineering.

Credits: 1.0
Lec-Rec-Lab: (0-1-0)
Semesters Offered: Spring
Restrictions: Must be enrolled in one of the following Level(s): Graduate; Must be enrolled in one of the following Major(s): Engineering - Environmental, Environmental Engrg Science, Civil Engineering, Environmental Engineering

CEE 5997 - Natural Resources Engineering Field Service

This course provides a supervised field experience in natural resources engineering and community development.

Credits: 1.0; May be repeated
Lec-Rec-Lab: (0-0-3)
Semesters Offered: Fall, Spring, Summer
Restrictions: Permission of instructor required; Must be enrolled in one of the following Level(s): Graduate

CEE 5999 - Master's Research

Study of an acceptable civil or environmental engineering problem and preparation of a report or thesis.

Credits: variable to 10.0; May be repeated; Graded Pass/Fail Only
Semesters Offered: Fall, Spring, Summer
Restrictions: Must be enrolled in one of the following Level(s): Graduate

CM 4000 - Chemical Engineering Research

An undergraduate research experience on chemical engineering topics. Students work directly with faculty members on a research project. A report (written, poster, or oral) may be required.

Credits: variable to 3.0; Repeatable to a Max of 9
Semesters Offered: Fall, Spring, Summer
Restrictions: Permission of instructor required; May not be enrolled in one of the following Level(s): Graduate

CM 4020 - Undergraduate Research in Mineral Processing Engineering

An undergraduate research experience on mineral processing engineering topics. Students work directly with faculty members on a research project. A report (written, poster, or oral) may be required.

Credits: variable to 3.0; Repeatable to a Max of 9
Semesters Offered: Fall, Spring, Summer
Restrictions: Permission of instructor required; May not be enrolled in one of the following Level(s): Graduate

CM 4040 - Undergraduate Research in Biological Engineering

An undergraduate research experience on biological engineering topics, excluding biofuels. Students work directly with faculty members on a research project. A report (written, poster, or oral) may be required.

Credits: variable to 3.0; Repeatable to a Max of 9
Semesters Offered: Fall, Spring, Summer
Restrictions: Permission of instructor required; May not be enrolled in one of the following Level(s): Graduate

CM 4060 - Undergraduate Research in Polymer Engineering

An undergraduate research experience on polymer engineering topics. Students work directly with faculty members on a research project. A report (written, poster, or oral) may be required.

Credits: variable to 3.0; Repeatable to a Max of 9
Semesters Offered: Fall, Spring, Summer
Restrictions: Permission of instructor required; May not be enrolled in one of the following Level(s): Graduate

CM 4080 - Undergraduate Research in BioFuels Engineering

An undergraduate research experience on bio-fuels engineering topics. Students work directly with faculty members on a research project. A report (written, poster, or oral) may be required.

Credits: variable to 3.0; Repeatable to a Max of 9
Semesters Offered: Fall, Spring, Summer
Restrictions: Permission of instructor required; May not be enrolled in one of the following Level(s): Graduate

CM 4855 - Process Analysis & Design I

Capstone technical and economic evaluations of processes and unit operations. Application of cost estimation, energy efficiency, and economic evaluation techniques. Teams analyze an existing facility, identify improvement opportunities, demonstrate the economic consequences, and recommend a course of action.

Credits: 3.0
Lec-Rec-Lab: (2-0-3)
Semesters Offered: Fall
Restrictions: Must be enrolled in one of the following Major(s): Chemical Engineering
Pre-Requisite(s): CM 3120 and CM 3215 and (CM 3240 or CM 2120) and CM 3510 and CH 2410 and CM 3980(C)

CM 4860 - Process Analysis & Design II

Process and project design principles applied to realistic problems, including project evaluation and management. Problems include safety, environmental, and operability constraints. Emphasizes the profit motive in industry and the role of the chemical engineer.

Credits: 2.0
Lec-Rec-Lab: (2-0-0)
Semesters Offered: Spring
Restrictions: Must be enrolled in one of the following Major(s): Chemical Engineering
Pre-Requisite(s): CM 4855 and CM 3980

CM 4861 - Capstone Design Project

Team projects to optimize designs for new ventures with realistic constraints. Requires process synthesis, market research, economic evaluation, and risk analysis techniques. Develops skills in problem solving, critical thinking, and communication.

Credits: 1.0
Lec-Rec-Lab: (0-0-3)
Semesters Offered: Spring
Restrictions: Must be enrolled in one of the following Major(s): Chemical Engineering
Pre-Requisite(s): CM 4860(C) and CM 3980

CM 4900 - Interdisciplinary Design 1

Focuses on an interdisciplinary chemical engineering design project. (Senior project ready as defined by major substitutes for prerequisites)

Credits: variable to 3.0
Semesters Offered: Fall
Restrictions: Permission of department required; May not be enrolled in one of the following Class(es): Freshman, Sophomore, Junior

CM 4910 - Interdisciplinary Design 2

Focuses on an interdisciplinary chemical engineering design project. (Senior project ready as defined by major substitutes for prerequisites)

Credits: variable to 3.0
Semesters Offered: Spring
Restrictions: Permission of department required; May not be enrolled in one of the following Class(es): Freshman, Sophomore, Junior

CM 4990 - Special Topics in CM

Covers chemical engineering topics not included in regular courses, which may include biochemical engineering, design of biochemical reactions, composite materials, and numerical analysis of transport processes.

Credits: variable to 3.0; Repeatable to a Max of 12
Semesters Offered: On Demand
Restrictions: Permission of instructor required

CM 5900 - Special Topics in CM

A discussion of chemical engineering topics of current interest not included in regular graduate courses.

Credits: variable to 3.0; Repeatable to a Max of 9
Semesters Offered: On Demand
Restrictions: Permission of instructor required; Must be enrolled in one of the following Level(s): Graduate

CM 5950 - Advanced Special Projects

This is a course for graduate students who wish to do extensive work on projects or topics not directly related to their thesis topic and not covered in one of the graduate courses.

Credits: variable to 3.0; Repeatable to a Max of 9
Semesters Offered: On Demand
Restrictions: Permission of instructor required; Must be enrolled in one of the following Level(s): Graduate

CM 5990 - MS Research

An original investigation of a chemical engineering problem.

Credits: variable to 15.0; May be repeated; Graded Pass/Fail Only
Semesters Offered: Fall, Spring, Summer

EE 4000 - Undergraduate Research

An undergraduate research experience during the senior year in electrical or computer engineering. Students work on an active research project/grant with a faculty member. A report will be published in the department and archived.

Credits: variable to 4.0; Repeatable to a Max of 6
Semesters Offered: Fall, Spring, Summer
Restrictions: Permission of instructor required; Must be enrolled in one of the following Class(es): Junior, Senior

EE 4800 - Special Topics in Electrical and Computer Engineering

Covers specific topics in electrical engineering.

Credits: variable to 4.0; Repeatable to a Max of 6
Semesters Offered: On Demand
Restrictions: Permission of instructor and department required

EE 4805 - Electrical Engineering Project

A project in electrical engineering. An individual student or a group of students complete a mutually- agreed-upon project in consultation with a faculty member.

Credits: variable to 3.0; Repeatable to a Max of 6; Graded Pass/Fail Only
Semesters Offered: Fall, Spring, Summer
Restrictions: Permission of instructor and department required

EE 4901 - EE Design Project 1

The first semester of a program of study in which a group of students work on an engineering design project in consultation with a faculty member. (Senior project ready as defined by major substitutes for prerequisites)

Credits: 2.0
Lec-Rec-Lab: (1-0-3)
Semesters Offered: Fall
Restrictions: May not be enrolled in one of the following Class(es): Freshman, Sophomore, Junior
Pre-Requisite(s): (EE 3131 or (EE 3280 and EE 3261(C))) and EE 3901 and (EE 3171(C) or EE 3173(C))

EE 4910 - EE Design Project 2

The second semester of a program of study in which a group of students work on an engineering design project in consultation with a faculty member. (Senior project ready as defined by major substitutes for prerequisites)

Credits: 2.0
Lec-Rec-Lab: (0-1-3)
Semesters Offered: Spring
Pre-Requisite(s): EE 4901

EE 5290 - Selected Topics in Power Systems 1

Selected topics of current interest.

Credits: variable to 4.0; May be repeated
Semesters Offered: On Demand
Restrictions: Must be enrolled in one of the following Level(s): Graduate; Must be enrolled in one of the following Major(s): Electrical Engineering, Electrical Engineering, Electrical & Computer Engineer

EE 5805 - Directed Study in Electrical & Computer Engineering

Directed study on a topic mutually agreed upon by the student and the instructor.

Credits: variable to 3.0; Repeatable to a Max of 6
Semesters Offered: Fall, Spring, Summer
Restrictions: Permission of instructor required; Must be enrolled in one of the following Level(s): Graduate; Must be enrolled in one of the following Major(s): Electrical Engineering, Electrical Engineering

EE 5900 - Special Topics in Electrical Engineering

Special topics in electrical engineering selected by the student and approved by his/her advisor and the faculty member who will approve the study.

Credits: variable to 5.0; May be repeated
Semesters Offered: Fall, Spring, Summer
Restrictions: Must be enrolled in one of the following Level(s): Graduate; Must be enrolled in one of the following Major(s): Electrical & Computer Engineer, Electrical Engineering, Computer Engineering

EE 5990 - Thesis Research in Electrical Engineering

Study of some acceptable electrical engineering problem and preparation of a thesis.

Credits: variable to 10.0; May be repeated; Graded Pass/Fail Only
Semesters Offered: Fall, Spring, Summer
Restrictions: Permission of instructor required

EE 5991 - Project Research in Electrical Engineering

Study of some acceptable electrical engineering problem and preparation of a report.

Credits: variable to 6.0; May be repeated; Graded Pass/Fail Only
Semesters Offered: Fall, Spring, Summer
Restrictions: Permission of instructor required

EE 5992 - Practical Experience in Electrical Engineering

A collaboration with industry on some acceptable electrical engineering task and preparation of a report.

Credits: variable to 4.0; May be repeated; Graded Pass/Fail Only
Semesters Offered: Fall, Spring, Summer
Restrictions: Permission of department required

EE 5994 - International Electrical and Computer Engineering Field Experience

Field work and reporting from students in the Peace Corps Master's International Program in Electrical and Computer Engineering.

Credits: 1.0; May be repeated
Lec-Rec-Lab: (0-0-2)
Semesters Offered: Fall, Spring, Summer
Restrictions: Permission of instructor required; Must be enrolled in one of the following Level(s): Graduate; Must be enrolled in one of the following Major(s): Electrical & Computer Engineer, Electrical Engineering, Computer Engineering

ENG 4060 - Leadership in Group Environments

Develops collaborative leadership skills through active hands-on learning. Topics include collaborative software, communication, and group management strategies.

Credits: 1.0; Graded Pass/Fail Only
Lec-Rec-Lab: (0-1-0)
Semesters Offered: On Demand
Restrictions: May not be enrolled in one of the following Class(es): Freshman
Pre-Requisite(s): UN 1015 and (UN 1025)

ENG 4070 - Peer Mentoring Practicum

Experience designed for the practical application of leadership knowledge, skills, and behaviors acquired in the LEAP program or mentoring environment. The practicum experience will be designed and implemented by the student, with mentorship/guidance from the associated faculty.

Credits: 3.0; Graded Pass/Fail Only
Lec-Rec-Lab: (0-0-3)
Semesters Offered: On Demand
Restrictions: Permission of instructor required; May not be enrolled in one of the following Class(es): Freshman
Pre-Requisite(s): ENG 2060

ENG 4900 - Multidisciplinary Senior Design Project I

Introduction to engineering design, including modeling, simulation, economic decision making, and reliability. Integration of design principles in the solution of open-ended engineering problems. Projects are defined and planned with faculty and industrial guidance. Emphasizes economics and environmental constraints. Students must be Senior Project ready as defined by major.

Credits: variable to 4.0
Semesters Offered: On Demand
Restrictions: May not be enrolled in one of the following Class(es): Freshman, Sophomore, Junior

ENG 4905 - Senior Engineering Design Project

Students work in teams on one-semester open-ended capstone design projects developing and implementing original and creative solutions to real engineering problems. Students must be Senior Project ready as defined by major. May take ENG4905, ENG4900, or ENG4910.

Credits: 3.0
Lec-Rec-Lab: (0-1-4)
Semesters Offered: On Demand
Restrictions: May not be enrolled in one of the following Class(es): Freshman, Sophomore, Junior
Pre-Requisite(s): ENG 2120 or (MEEM 2110 and MEEM 2150) and (ENG 3200 or CEE 3200) or (MEEM 2201 and MEEM 3201) and (EE 3010 or EE 2112) and (CEE 3101 or CS 1121 or ENG 2505 or GE 2300 or MSE 2100) and (CEE 3332 or GE 3850 or MEEM 3600 and ENG 3830(C) or (ENG 3505 and ENG 4505))

ENG 4910 - Multidisciplinary Senior Design Project II

Continuation of ENG4900. Introduction to engineering design including modeling, simulation, economic decision making and reliability. Integration of design principles in the solution of open-ended engineering problems. Projects are defined and planned with faculty and industrial guidance. Emphasizes economics and environmental constraints. (Senior project ready as defined by major substitutes for prerequisites)

Credits: variable to 4.0
Semesters Offered: On Demand
Restrictions: May not be enrolled in one of the following Class(es): Freshman, Sophomore, Junior
Pre-Requisite(s): ENG 4900

ENG 4990 - Special Topics in Engineering

Engineering topics of interest to students and faculty that are not normally covered in the existing courses.

Credits: variable to 3.0; Repeatable to a Max of 6
Semesters Offered: On Demand
Restrictions: Permission of instructor required

ENG 5060 - Leadership in Group Environments

Develops collaborative leadership skills through active hands-on learning. Topics include collaborative software, communication, and group management strategies.

Credits: 1.0
Lec-Rec-Lab: (0-1-0)
Semesters Offered: Fall, Spring
Restrictions: Must be enrolled in one of the following Level(s): Graduate

ENG 5100 - The Engineering Process

This course introduces the engineering problem solving and design processes. Students will learn about the engineering profession and will complete a design/build/test project.

Credits: 4.0
Lec-Rec-Lab: (0-3-2)
Semesters Offered: Summer
Restrictions: Must be enrolled in one of the following Level(s): Graduate

ENG 5200 - Engineering Applications in the Physical Sciences

This class will show how engineers use principles from the physical sciences to solve problems and design systems. Key concepts will be linked to the Michigan Curriculum Frameworks for precollege education.

Credits: 4.0
Lec-Rec-Lab: (0-3-2)
Semesters Offered: Summer
Restrictions: Must be enrolled in one of the following Level(s): Graduate
Pre-Requisite(s): ENG 5100 or (ENG 5101 and ENG 5102)

ENG 5300 - Engineering Applications in the Earth Sciences

This course will show how engineers use principles from the earth sciences to solve problems and design systems. Key concepts will be linked to the Michigan Curriculum Frameworks for precollege education.

Credits: 4.0
Lec-Rec-Lab: (0-3-2)
Semesters Offered: Summer
Restrictions: Must be enrolled in one of the following Level(s): Graduate
Pre-Requisite(s): ENG 5100

ENG 5400 - Engineering Applications in the Life Sciences

Students will gain hands-on experience linking engineering technologies to the biological sciences. Participants will visit labs and field sites at Michigan Tech to observe and participate in current research. Topics covered include biofuels, environmental restoration, environmental toxins, and ecosystem measurement.

Credits: 4.0
Lec-Rec-Lab: (0-3-2)
Semesters Offered: Summer
Restrictions: Must be enrolled in one of the following Level(s): Graduate
Pre-Requisite(s): ENG 5100

ENG 5990 - Special Topics in Engineering

Engineering topics of interest to students and faculty that are not normally covered in the existing courses.

Credits: variable to 3.0; Repeatable to a Max of 6
Semesters Offered: On Demand
Restrictions: Permission of instructor required; Must be enrolled in one of the following Level(s): Graduate

ENG 5998 - Engineering Design Practicum

An advanced independent study for students in the Master of Engineering program. In consultation with his/her advisor, the student develops and executes a project demonstrating capabilities in problem solving, communications, and decision making. The practicum can be completed on or off campus.

Credits: variable to 4.0; Repeatable to a Max of 4
Semesters Offered: Fall, Spring, Summer
Restrictions: Permission of instructor required; Must be enrolled in one of the following Level(s): Graduate; Must be enrolled in one of the following College(s): College of Engineering

GE 4000

GE 4900 - Capstone I

Capston engineering design course focusing on a realistic, complex, open-ended engineering problem. Project includes technical design, economic analysis, environmental impacts, and regulations. Report writing required. (Senior project ready as defined by major substitutes for prerequisites).

Credits: 3.0
Lec-Rec-Lab: (0-3-0)
Semesters Offered: Fall, Spring
Restrictions: May not be enrolled in one of the following Class(es): Freshman, Sophomore, Junior

GE 4910 - Capstone II

Capstone engineering design course focusing on a realistic, complex, open-ended engineering problem. Project includes technical design, economic analysis, environmental impacts, and regulations. Report writing required. (Senior project ready as defined by major substitutes for prerequisites).

Credits: 3.0
Lec-Rec-Lab: (0-3-0)
Semesters Offered: Fall, Spring
Restrictions: May not be enrolled in one of the following Class(es): Freshman, Sophomore, Junior
Pre-Requisite(s): GE 4900

GE 4930 - Special Topics in Geological Engineering

Study and discussion of geological engineering topics.

Credits: variable to 5.0; Repeatable to a Max of 10
Semesters Offered: On Demand
Restrictions: Permission of instructor required

GE 4931 - Special Topics in Geology

Study and discussion of geology topics.

Credits: variable to 5.0; Repeatable to a Max of 10
Semesters Offered: On Demand
Restrictions: Permission of instructor required

GE 4933 - Special Topics in Geophysics

Study and discussion of geophysics topics.

Credits: variable to 5.0; Repeatable to a Max of 10
Semesters Offered: On Demand
Restrictions: Permission of instructor required

GE 4934 - Special Topics in Mining Engineering

Study and discussion of topics in mining engineering not included in regular undergraduate courses.

Credits: variable to 5.0; Repeatable to a Max of 10
Semesters Offered: On Demand

GE 4961 - Independent Geology Research Project

Approved literature, laboratory, and/or field geology research problem originated by the student or assigned by the instructor. A final report is required.

Credits: variable to 9.0; Repeatable to a Max of 9
Semesters Offered: On Demand
Restrictions: Permission of instructor required; May not be enrolled in one of the following Class(es): Freshman, Sophomore

GE 4962 - Independent Geophysics Research Project

Approved literature, laboratory, and/or field geophysics research problem originated by the student or assigned by the instructor. A final report is required.

Credits: variable to 9.0; Repeatable to a Max of 9
Semesters Offered: On Demand
Restrictions: Permission of instructor required; May not be enrolled in one of the following Class(es): Freshman, Sophomore

GE 5930 - Special Topics in Geological Engineering

Study and discussion of geological engineering topics.

Credits: variable to 9.0; Repeatable to a Max of 9
Semesters Offered: On Demand
Restrictions: Permission of instructor required; Must be enrolled in one of the following Level(s): Graduate

GE 5940 - Special Topics in Geology

Study and discussion of geology topics.

Credits: variable to 9.0; Repeatable to a Max of 9
Semesters Offered: On Demand
Restrictions: Permission of instructor required; Must be enrolled in one of the following Level(s): Graduate

GE 5950 - Special Topics in Geophysics

Study and discussion of geophysics topics.

Credits: variable to 9.0; Repeatable to a Max of 9
Semesters Offered: On Demand
Restrictions: Permission of instructor required; Must be enrolled in one of the following Level(s): Graduate

GE 5960 - Special Topics in Mining Engineering

Study and discussion of mining engineering topics.

Credits: variable to 9.0; Repeatable to a Max of 9
Semesters Offered: On Demand
Restrictions: Permission of instructor required; Must be enrolled in one of the following Level(s): Graduate

GE 5994 - International Geological Practicum

Geological field work outside of the U.S. used by Peace Corps Master International students during their field assignments. May be used repeatedly up to 12 credits.

Credits: 1.0; Repeatable to a Max of 12
Lec-Rec-Lab: (0-1-0)
Semesters Offered: Fall, Spring, Summer
Restrictions: Permission of instructor required; Must be enrolled in one of the following Major(s): Geology, Geophysics, Geological Engineering

GE 5995 - Domestic Geological Practicum

Project course for students serving in a U.S. based service activity for one or more semesters. The service activities pertain to community development in the context of geological resource development, restoration, or protection or geological hazard mitigation.

Credits: 1.0; May be repeated
Lec-Rec-Lab: (0-0-3)
Semesters Offered: Fall, Spring, Summer
Restrictions: Permission of instructor required; Must be enrolled in one of the following Level(s): Graduate

GE 5999 - Master's Graduate Research

Research of an acceptable geological engineering, mining engineering, geology, or geophysics problem and preparation of a thesis.

Credits: variable to 15.0; May be repeated; Graded Pass/Fail Only
Semesters Offered: Fall, Spring, Summer
Restrictions: Must be enrolled in one of the following Level(s): Graduate

MEEM 4990 - Special Topics in Mech Engg

Problems in mechanical engineering, engineering mechanics, manufacturing, or industrial engineering that are not covered in regular courses.

Credits: variable to 6.0; Repeatable to a Max of 6
Semesters Offered: Fall, Spring, Summer
Restrictions: Permission of department required; May not be enrolled in one of the following Class(es): Freshman, Sophomore

MEEM 4901 - Senior Capstone Design I

Students work in teams on "open-ended" engineering capstone design projects - most with industrial sponsors - developing original and creative solutions to real engineering problems.

Credits: 2.0
Lec-Rec-Lab: (0-0-6)
Semesters Offered: Fall, Spring
Restrictions: Must be enrolled in one of the following Major(s): Mechanical Engineering
Pre-Requisite(s): MEEM 3400 and EE 3010(C) and MEEM 3600(C) and MEEM 3901 and MEEM 3201 and MEEM 3750 and MEEM 3911 and MA 3710(C)

MEEM 4911 - Senior Capstone Design II

Design projects started in MEEM4901 are completed and evaluated using computer-aided engineering methods, physical models, and/or prototypes as appropriate.

Credits: 2.0
Lec-Rec-Lab: (0-0-6)
Semesters Offered: Fall, Spring
Restrictions: Must be enrolled in one of the following Major(s): Mechanical Engineering
Pre-Requisite(s): EE 3010 and MEEM 3201 and MEEM 3600 and MEEM 3750 and MEEM 4901

MEEM 4999 - Mechanical Engineering Senior Research Thesis

An undergraduate research experience during the senior year in mechanical engineering. Students begin work on an active research project/grant with faculty or continue work from the previous year. A thesis will be published in the department and archived.

Credits: 3.0; Repeatable to a Max of 6
Lec-Rec-Lab: (0-3-0)
Semesters Offered: Fall, Spring, Summer
Restrictions: Permission of department required; Must be enrolled in one of the following Major(s): Mechanical Eng-Eng Mechanics, Mechanical Engineering; May not be enrolled in one of the following Class(es): Freshman, Sophomore, Junior

MEEM 5990 - Special Topics

Study of selected subjects related to mechanical engineering or engineering mechanics.

Credits: variable to 4.0; May be repeated
Semesters Offered: Fall, Spring, Summer
Restrictions: Permission of department required; Must be enrolled in one of the following Level(s): Graduate

MEEM 5999 - Graduate Research

Research/investigation on a topic related to mechanical engineering or engineering mechanics leading to the submission of a thesis or report in partial fulfillment of the requirements for the master's degree.

Credits: variable to 15.0; May be repeated; Graded Pass/Fail Only
Semesters Offered: Fall, Spring, Summer
Restrictions: Must be enrolled in one of the following Level(s): Graduate; Must be enrolled in one of the following Major(s): Mechanical Engineering, Mechanical Eng-Eng Mechanics, Engineering Mechanics

MEEM 6000 - Graduate Seminar

Presentations/seminars on issues related to mechanical engineering and engineering mechanics. May include invited speakers from industry, government labs, and academe.

Credits: 1.0; Repeatable to a Max of 2
Lec-Rec-Lab: (0-1-0)
Semesters Offered: Fall, Spring
Restrictions: Must be enrolled in one of the following Level(s): Graduate

MSE 4130 - Materials Science & Engineering Senior Design Project I

Conducted in teams of students working with industrial partners. Open to all engineering majors interested in interdisciplinary senior design projects. Non-MSE majors must be senior project ready as defined by their major program and obtain permission of the MSE department.

Credits: 2.0
Lec-Rec-Lab: (0-0-6)
Semesters Offered: Fall
Restrictions: May not be enrolled in one of the following Class(es): Freshman, Sophomore, Junior
Pre-Requisite(s): MSE 3190

MSE 4140 - Materials Science & Engineering Senior Design Project II

Senior design project conducted in teams of students working with an industrial partner. Open to all engineering majors interested in interdisciplinary senior design projects. Senior project ready as defined by major substitutes for prerequisites.

Credits: 2.0
Lec-Rec-Lab: (0-0-6)
Semesters Offered: Spring
Restrictions: May not be enrolled in one of the following Class(es): Freshman, Sophomore, Junior
Pre-Requisite(s): MY 4920 or MSE 4130

MSE 4970 - Special Topics - Materials Science & Engineering

Special topics in materials science and engineering.

Credits: variable to 4.0; May be repeated
Semesters Offered: Fall, Spring, Summer
Restrictions: Permission of instructor required

MSE 4990 - Undergraduate Research

Undergraduate research in materials science and engineering. Independent research conducted under the guidance of a faculty member.

Credits: variable to 6.0; May be repeated
Semesters Offered: Fall, Spring, Summer
Restrictions: Permission of instructor required

MSE 5900 - Graduate Professional Preparation

A weekly seminar covering topics relevant to professional development, such as technical seminars, effective communication techniques, intellectual property, engineering ethics, global and social issues in engineering, and diversity, equity and inclusion.

Credits: 1.0; May be repeated
Lec-Rec-Lab: (0-1-0)
Semesters Offered: Fall
Restrictions: Must be enrolled in one of the following Level(s): Graduate; Must be enrolled in one of the following Major(s): Materials Science and Engrg

MSE 5970 - Special Topics - Graduate Materials Science and Engineering

Special Topics in Materials Science and Engineering at the Graduate level.

Credits: variable to 4.0; Repeatable to a Max of 8
Semesters Offered: Fall, Spring, Summer
Restrictions: Permission of instructor required; Must be enrolled in one of the following Level(s): Graduate

MSE 5990 - MS Thesis Research

Fundamental and applied research in metallurgical and materials engineering. Taken by graduate students in partial fulfillment of the MS thesis requirements.

Credits: variable to 12.0; May be repeated; Graded Pass/Fail Only
Semesters Offered: Fall, Spring, Summer
Restrictions: Must be enrolled in one of the following Level(s): Graduate

or any other research/special topics/seminar/etc credits (courses without a specific course description and/or syllabus). Undergraduate students cannot typically enroll in 6000-level courses. Special topics courses (4990, 5990, etc.) may be approved on an individual section/semester basis if a student/faculty member submits or creates a course syllabus for evaluation. OSM 4300 is also acceptable.

Free Electives

Any credits that are 1000-level or above, not on the co-curricular activities list, and not non-repeatable duplicated or equivalent courses. UN 3002, UN 3003, etc. (Cooperative Education credits) can be used as free electives in the BSME curriculum.