John H. Johnson

Contact

jjohnson@mtu.edu
906-482-6413
MEEM 909

Research Professor, Mechanical Engineering—Engineering Mechanics
Professor Emeritus, Mechanical Engineering—Engineering Mechanics

PhD, University of Wisconsin-Madison

Areas of Expertise

Areas of Expertise
Internal Combustion Engines
Diesels
Air Pollution
Emissions Modeling

Research Interests

Diesel Aftertreatment Experimental and Modeling Studies
Diesel Aftertreatment System Controls
Heavy duty Vehicle Technologies for Reducing Fuel Consumption

Recent Publications

Venkata, Rajesh, Chundru., Boopathi, S., Mahadevan., John, H., Johnson., Gordon, G., Parker., Mahdi, Shahbakhti. (2019). "Development of a 2D Model of a SCR Catalyst on a DPF." 5(2):133-171. doi: 10.1007/S40825-019-00115-4
Chundru, Venkata R., Mahadevan, Boopathi S., Johnson, John H., Parker, Gordon G., Shahbakhti, Mahdi, "Development of a 2D Model of a SCR Catalyst on a DPF," Emission Control Science and Technology, Vol. 5, No. 2, online first Apr 2019, pp. 133-171. DOI 10.1007/s40825-019-00115-4
Johnson, John H., "Universities Need to Take Responsibility for Increasing U.S. Citizen M.S. and Ph.D. Graduates in Engineering," SAE International UPDATE, Jul 2018, pp. 20-22.
B. S. Mahadevan, J. H. Johnson, and M. Shahbakhti, “Experimental and Simulation Analysis of Temperature and Particulate Matter Distribution for a Catalyzed Diesel Particulate Filter,” Emission Control Science and Technology, Oct 2015, Vol. 1, No. 4, pp. 255-283, DOI:10.1007/s40825-015-0022-y Read More
Song, Xiaobo, Naber, Jeffrey D., Johnson, John H., "A Review of the Literature of Selective Catalytic Reduction Catalysts Integrated into Diesel Particulate Filters," International Journal of Engine Research, Vol. 16, No. 6, pp.738-749, Sep 2015, DOI: 10.1177/1468087414545094 Read More
B. S. Mahadevan, J. H. Johnson, and M. Shahbakhti, “Development of a Catalyzed Diesel Particulate Filter Multi-zone Model for Simulation of Axial and Radial Substrate Temperature and Particulate Matter Distribution,” Emission Control Science and Technology, May 2015, Vol. 1, No. 2, pp. 183-202, DOI:10.1007/s40825-015-0015-x Read More
Song, Xiaobo, Naber, Jeffrey D., Johnson, John H., "A Study of the Effects of NH3 Maldistribution on a Urea-SCR System," International Journal of Engine Research, Feb 2015, Vol. 16, No. 2, pp. 213-222, DOI: 10.1177/1468087414532462 Read More
Foley, Ryan, Johnson, John H., Naber, Jeffrey D., Rogoski, Leigh, "Experimental Measurements of Particulate Matter Distribution in a Catalyzed Particulate Filter," Journal of Emission Control Science and Technology, Jan 2015, Vol. 1, No. 1, pp. 32-48, DOI: 10.1007/s40825-014-0005-4 Read More
Song, Xiaobo, Parker, Gordon G., Johnson, John H., Naber, Jeffrey D., Pihl, Josh, "A SCR Model Calibration Approach with Spatially Resolved Measurements and NH3 Storage Distributions," Journal of Emission Control Science and Technology, Nov 2014, Vol. 1, No.1, pp. 98-107, DOI: 10.1007/s40825-014-0003-6 Read More
Parker, Gordon, Johnson, John H., Devarakonda, M., Strots, V., 2009, "Model‐Based Control System Design in a Urea‐SCR Aftertreatment System Based on NH3 Sensor Feedback," International Journal of Automotive Technology, Vol. 10, Issue 6, pp. 653‐662.
Parker, Gordon, Yang, Song‐Lin (Jason), Johnson, John H., Singh, N., 2009, "Vehicle Engine Aftertreatment System Simulation (VEASS) Model: Application to a Controls Design Strategy for Active Regeneration of a Catalyzed Particulate Filter," SAE 2005 Transactions Journal of Fuels and Lubricants, SAE Paper No. 2005‐01‐0970.
Parker, Gordon, Johnson, John H., Devarakonda, M., Strots, V., and Santhanam, S., 2009, "Model‐Based Estimation and Control System Development in a Urea‐SCR Aftertreatment System," SAE International Journal of Fuels and Lubricants, Vol. 1, No. 1, pp. 646‐661.
Yang, Song‐Lin (Jason), Johnson, John H., Triana, A.P., Hasan, M., 2007, "An Advanced 1D 2‐Layer Catalyzed Diesel Particulate Filter Model to Simulate: Filtration by the Wall and Particulate Cake, Oxidation in the Wall and Particulate Cake by NO2 and O2, and Regeneration by Heat Addition," SAE 2006 Transactions Journal of Fuels and Lubricants.
Naber, Jeffrey, Johnson, John H., Bagley, S.T., Singh, P., Thalagavara, A.M., 2006, "An Experimental Study of Active Regeneration of an Advanced Catalyze Particulate Filter by Diesel Fuel Injection Upstream of an Oxidation Catalyst," SAE Transactions Journal of Fuels and Lubricants, Vol. 115, pp. 334‐357.
Singh, S., Johnson, J. H., Parker G.G., and Yang, S.L., “Vehicle Aftertreatment System Simulation (VEASS Model: Application to a Controls Design Strategy for Active Regeneration of a Catalyzed Particulate Filter”, SAE Paper No. 2005-01-0970, Presented at SAE 2005 World Congress, April 11-14, 2005.
Shende, A.S., Johnson, J.H., Yang, S.L. Bagley, S.T., and Thalagavara A.M., 2005, “The Filtration and Particulate Matter Oxidation Characteristics of a Catalyzed Wall‐flow Diesel Particulate Filter: Experimental and 1‐D 2‐Layer Model Results,” SAE Paper No. 2005‐01‐0949, Presented at SAE 2005 World Congress, April 11‐14, 2005.
George D. Harvey, Kirby J. Baumgard, John H. Johnson, Linda D. Gratz, Susan T. Bagley, and David G. Leddy, "Effects of a Ceramic Particle Trap and Copper Fuel Additive on Heavy-Duty Diesel Emissions," SAE Paper No. 942068, presented at SAE Fuels and Lubricants Meeting and Exposition, October 17-20, 1994.
Gregory M. Pataky, Kirby J. Baumgard, Linda D. Gratz, Susan T. Bagley, David G. Leddy, and John H. Johnson, "Effects of an Oxidation Catalytic Converter on Regulated and Unregulated Diesel Emissions", SAE Paper No. 940243, presented at SAE International Congress and Exposition, February 28 - March 3, 1994.
John H. Johnson, Susan T. Bagley, Linda D. Gratz, and David G. Leddy, "A Review of Diesel Particulate Control Technology and Emission Effects", SAE Paper No. 940233, 1992 Horning Memorial Award Lecture, presented at SAE International Congress and Exposition, February 28 - March 4, 1994.