40 refereed and 30+ Non-reviewed publications. Examples include:
1) Gopujkar, S., Davis, R., Worm, J., Duncan, J., Hansley, W., "Effect of in-cylinder heat transfer and surface temperatures on knock in an SI engine", International Journal of Engine Research, doi.org/10.1177/14680874251319829
2) Bryant Goodenough, Alexander Czarnecki, Darrell Robinette, Jeremy Worm, Brian Burroughs, Phil Latendresse, John Westman "Propulsion Electrification Architecture Selection Process and Cost of Carbon Abatement Analysis for Heavy-Duty Off-Road Material Handler," SAE Int. J. Commer. Veh. 17(3):223-249, 2024, https://doi.org/10.4271/02-17-03-0014.
3) Gopujkar, S., Davis, R., Worm, J., Duncan, J., Hansley, W., "Methods and Metrics to Assess the Accuracy of Heat Flux Data from a Spark Ignition IC Engine", 2024, doi:10.1177/14680874241237143.
4) Gopujkar, S.;Worm, J.Assessing the Benefits ofElectrification for the Mackinac Island Ferry from an Environmental and Economic Perspective. Sustainability2024, 16, 4297. https://doi.org/10.3390/su16104297
5) Hand, J., Hall, S., Carr, M., and Worm, J., “Warranty Repairs Reimagined through Machine Learning and Statistical Pattern Recognition (Part 1),” SAE Technical Paper 2024-01-5071, 2024, doi:10.4271/2024-01-5071.
6) Goodenough, B., Czarnecki,A., Robinette, D., Worm, J.et al., “Propulsion Electrification Architecture Selection Process and Cost of Carbon Abatement Analysis for Heavy-Duty Off-Road Material Handler,” SAE Int. J. Commer. Veh. 17(3):2024, doi:10.4271/02-17-03-0014. ISSN: 1946-391X e-ISSN: 1946-3928
7) Goodenough, B., Czarnecki, A., Worm, J., Robinette, D., Latendresse, P., Westman, J., "Reducing Fuel Consumption on a Heavy-Duty Nonroad Vehicle: Conventional Powertrain Modifications" 2023, SAE Technical Paper 2023-01-0466. ISSN: 0148-7191
e-ISSN: 2688-3627
8) Gopujkar, S.B., Worm, J., and Davis, R.S., “Determination of Octane Index and K-Factor in a 2.0L, Four-Cylinder Turbocharged SI Engine Using the Primary Reference Fuel Method—Part II,” SAE Technical Paper 2022-01-5006, 2022, doi:10.4271/2022-01-5006.
9) Davis, R., Duncan, J., Gopujkar, S., and Worm, J., “Evaluation of Cylinder Pressure Transducer Performance Including the Influence of Mounting Location and Thermal Protection,” SAE Technical Paper 2022-01-5014, 2022, doi:10.4271/2022-01-5014.
10) Davis, R., Duncan, J., Gopujkar, S., and Worm, J., “Evaluation of Cylinder Pressure Transducer Performance Including the Influence of Mounting Location and Thermal Protection,” SAE Technical Paper 2022-01-5014, 2022, doi:10.4271/2022-01-5014.
11) Gopujkar, S., Worm, J., Barros, S., Bonfochi Vinhaes, V. et al., “Increasing the Effective AKI of Fuels Using Port Water Injection (Part II),” SAE Technical Paper 2022-01-0434, 2022, doi:10.4271/2022-01-0434.
12) Gopujkar, S., Worm, J., Barros, S., Christensen, C., "Increasing the Effective AKI of Fuels Using Port Water Injection (Part I)", SAE Technical Paper 2021-01-0470, 2021, DOI: 10.4271/2021-01-0470
13) Gopujkar, S., Worm, J., Duncan, J., and Hansley, W., "Determination of Octane Index and K in a 2.0L, 4-Cylinder Turbocharged SI Engine Using the Primary Reference Fuel (PRF) Method," SAE Technical Paper 2020-01-0552, 2020, https://doi.org/10.4271/2020-01-0552.
14) Miller, T., Duncan, J., Hansley, W., Beard, J., Worm, J., Naber, J., "Design, Actuation, Experimental Setup and Testing of a 4-Cylinder Gasoline Spark Ignited Variable Compression Ratio Engine", Proceedings of the ASME 2020, Internal Combustion Engine Fall Conference, ICEF2020, November 1-4, 2020, Denver, CO, USA., https://doi.org/10.1115/ICEF2020-2960.
15) Yang, Z., Miganakallu, N., Miller, T., Vinhaes, V., Worm, J., Naber, J., Roth, D. "Investigation of High Load Operation of Spark-Ignited Over-Expanded Atkinson Cycle Engine", Applied Energy, Volume 262, 15 March 2020, 114519, DOI.org/10.1016/j.apenerg.2020.114519
16) Yang, Z., Miganakallu, N., Miller, T., Worm, J., Naber, J., Roth, D. "Comparing Methods for Improving Spark-Ignited Engine Efficiency: Over-Expansion with Multi-Link Cranktrain and High Compression Ratio with Late Intake Valve Closing", Applied Energy, Volume 262, 15 March 2020, 114560, DOI.org/10.1016/j.apenerg.2020.114560
17) Gopujkar, Siddharth, Worm, Jeremy, Robinette Darrell, "Methods of Pegging Cylinder Pressure to Maximize Data Quality" SAE World Congress. 2019-01-0721
18) Worm, J., Naber, J., Duncan, J., Atkinson, W., Barros, S., "Water Injection as an Enabler for Increased Efficiency at High-Load in a Direct Injected, Boosted, SI Engine". SAE International Journal of Engines. 2017
19) Gauchia, Antonio, Worm, Jeremy J., Naber, Jeffrey D., Davis, Christopher, "Modeling, Validation, And Analysis of HMMWV XM1124 Hybrid Powertrain", 2014 NDIA Ground Vehicle Systems Engineering and Technology Symposium
20) Worm, J. J., Dice, P. W., Jehlik, F., McFarland, J. Published The Effect of Individual Cylinder Fuel and Air Mixing in a High Performance Automotive Engine. Proceedings of the ASME 2013 Internal Combustion Engine Fall Technical Conference ICEF2013 ( vol. ICEF2013). American Society of Mechanical Engineers.
