Faculty Publications

Faculty in the Department of Mechanical Engineering-Engineering Mechanics author leading research that appears in a wide variety of scientific journals and publications. Select a faculty member below to view some of their most recent contributions to publications—both during their tenure at Michigan Tech and in prior work.

Ossama Abdelkhalik

Jeffrey S. Allen

Andrew Barnard

  • Barnard, Andrew, Brungart, Timothy, McDevitt, Timothy, Jenkins, David, Kline, Brian, 2013, “Feasibility of a high-powered carbon nanotube thin-film loudspeaker,” J. Acoust. Soc. Am. Express Letters, 134(3), EL276-EL281.
  • Barnard, Andrew, Hambric, Stephen, Maynard, Julian, 2012, “Underwater measurement of sound power and directivity using Supersonic Intensity in Reverberant Environments,” J. Sound and Vib., 331, pp. 3931-3944.
  • Conlon, Stephen, Evans, Samuel, Smith, Edward, Romano, Peter, Barnard, Andrew, 2012, “OH-58 Tailboom Damage Detection Study,” Proc. Am. Helicopter Society 68th Annual Meeting, May 2012, Fort Worth, TX.
  • Barnard, Andrew, Porter, Scott, Bostron, Jason, terMeulen, Ryan, Hambric, Stephen, 2011, “Evaluation of crowd noise levels during college football games,” Noise Control Eng. J., 59(6), pp. 667-680.
  • Barnard, Andrew, Hambric, Stephen, 2011, “Design and implementation of a shielded underwater vector sensor for laboratory environments,” J. Acoust. Soc. Am., 130(6), EL387-EL391.
  • Semperlotti, Fabio, Conlon, Stephen, Barnard, Andrew, 2011, “Airframe structural damage detection: A non-linear structural surface intensity based technique,” J. Acoust. Soc. Am., 129(4), EL121-EL127.
  • Jason Bostron, Timothy Brungart, Andrew Barnard, Timothy McDevitt, “Atmospheric effects on voice command intelligibility from acoustic hail and warning devices,” J. Acoust. Soc. Am., 129(4), 2237-2244, (2011).
  • Andrew Barnard, David Jenkins, Timothy Brungart, Timothy McDevitt, Brian Kline, Nicholas Nicholas, “Beam steering for a long range acoustic hail and warning device for maritime applications,” Noise Control Eng. J., 59(1), 1-9, (2011).
  • Timothy Brungart, Andrew Barnard, Timothy McDevitt, David Jenkins, Brian Kline, Nicholas Nicholas, “Development of a long range acoustic hail and warning device for maritime applications,” Noise Control Eng. J., 57(1), 1-9, (2009).
  • Andrew Barnard, Philip Gillett, Kamal Idrisi, Stephen Hambric, Marty Johnson, “Noise levels during college football games and associated effects on players and fans,” Proc. of 2008 ASME NCAD Conference, NCAD2008-73012, Dearborn, MI, (2008).

Ezra Bar-Ziv

  • Bar-Ziv, Ezra, Saveliev, Roman, 2013, “Torrefied-biomass from municipal solid waste for power production,” ASME-Power2013-​98044.
  • Klinger, Jordan, Klemetorl, Bethany, Shonnard, David, Bar-Ziv, Ezra, 2013, “Temperature dependence of aspen torrefecation research kinetic,” AICHE Meeting, Journal of Analytical and Applied Pyrolysis, in review.
  • Bar-Ziv, E., Saveliev, R., Chudnovsky, B., 2012, “Torrefied-biomass from municipal solid waste for power production,” ICONE20POWER2012-54122.
  • Bar Ziv, E., Berman, Y., Saveliev, R., Perelman, M., Korytnyi, E., Chudnovsky, B., 2012, ”Prediction of fouling and slagging in pulverized-coal fired furnaces,” ICONE20POWER2012-54121.
  • Chudnovsky, B., Talanker, A., Berman, Y., Saveliev, R., Perelman, M., Korytnyi, E., Davidson, B., Bar-Ziv, E., 2010, “Prediction of performance from PRB coal fired in utility boilers with various furnace and firing system arrangements,” Journal of Engineering for Gas Turbines and Power, 132:11-14.
  • Bar-Ziv, E., Berman, Y., Saveliev, R., Perelman, M., Korytnyi, E., Davidson, B., 2010, “Fouling formation in 575 MW tangential-fired pulverized-coal boiler,” Journal of Engineering for Gas Turbines and Power, 132:15-22.

John E. Beard

  • Beard, John, Weinmann, Klaus J., Emblom, W.J., 2009, "Strains Generated In Selected Regions For An Intelligent Die During Stamp Forming," Transactions of the NAMRI/SME, Vol. 37.
  • Manor, N., Anderson, J., Beard, J., 2003, “Design and Development of the 2003 Michigan Tech Futuretruck, a Parallel Hybrid Electric Vehicle,” SAE Publication 2003-01-1257.
  • Wright, D.D., Beard, J.E., Nelson, D.A., Michigan Tech University, In: Enderle, J.D. and Hallowell, B., editors. NSF 2002 Engineering Senior Design Projects to Aid Persons with Disabilities. Mansfield Center, CT: Creative Learning Press, 2003.
  • Beard, John, Manor, Nicholas Allan, 2003, "Design and Development of the 2002 Michigan Tech Futuretruck, a Parallel Hybrid Electric Vehicle," SAE Publication, No. 2003-01-1257.
  • M. J. Hurt, J.E. Beard, “Non-Steady State Simulation of a Hybrid-Electric Vehicle,” 03AE-142 Society of Automotive Engineering
  • Bartley, B., Manor, N., Muehlfeld, C., Rutkowski, B., Trombley, J., Curlee, J., Pero, J., Lobbestael, B., Kiisskila, J., McGinn, J., Beard, J., 2003, “Design and Development of the 2002 Michigan Tech Futuretruck, a Parallel Hybrid Electric Vehicle,” AE Publication 2003-01-1257.
  • Beard, John, Minor, M.A., 1995, "Finite Element Analysis of a Powered Gait Orthosis," Proceedings of the ASME Advances in Bioengineering, ASME Publication, Book No. H010041995.

Jason R. Blough

  • Jia, Libin, Blough, Jason R., Naber, Jeffrey D., Zekavat, Seyed A., 2014, "Accelerometer-Based Combustion Metrics Reconstruction With Radial Basis Function Neural Network for a 9 L Diesel Engine,” Journal of Engineering for Gas Turbines and Power, Vol. 13(3), March 1, 2014, Article No. 031507, 9 pages, DOI: 10.1115/1.4025886.
  • Blough, Jason, Dilworth, B., 2010, "Realization of Ground Effects on Snowmobile Pass-by Noise Testing," SAE International Journal of Commercial Vehicles, Vol. 2.
  • Blough, Jason, Londhe, N., 2009, "Application of the ISO 13472-1 in Situ Technique for Measuring the Acoustic Absorption Coefficient of Grass and Artificial Turf Surfaces," Applied Acoustics, Vol. 70, Issue 1, pp. 129-141.
  • Blough, Jason, Anderson, Carl, Miers, Scott, Barna, Glen L., Koray Inal, M., 2008, "A Wireless Microwave Telemetry Data Transfer Technique for Reciprocating and Rotating Components," Journal of Engineering for Gas Turbines and Power, Volume 130, Issue 2, 025001, 9 pages.
  • Blough, Jason, Anderson, Carl, Johnson, Mark, Robinette, Darrell L., Schweitzer, Jean, 2007, "Characterizing the Effect of Automotive Torque Converter Design Parameters on the Onset of Cavitation at Stall," SAE 2007 Transactions Journal of Passenger Cars- Mechanical Systems, Document Number: 2007-01-2231.
  • Blough, Jason, Rao, Mohan D., Ge, Tony, Johnson, David, Van Karsen, Jeffrey, 2007, "Estimation of Powertrain Inertia Properties via an In-situ Method," SAE 2007 Transactions- Journal of Passenger Cars Mechanical Systems, Document Number: 2007-01-2410.
  • Blough, Jason, Dilworth, Brandon, 2007, “Implementation of the Time Variant Discrete Fourier Transform as a Real-Time Order Tracking Method,” SAE 2007 Transactions-Journal of Passenger Cars Mechanical Systems.
  • Blough, J.R., Gwaltney, G. and Vizanko, J., “Quantifying How the Environment Effects SAE-J192 Pass-by Noise Testing of Snowmobiles,” Proceedings of the 2005 SAE Noise and Vibration Conference, May 2005, Traverse City, MI. SAE Paper number: 05NVC-236.
  • Kowalski, D., Blough, J.R., and Anderson, C., “Cavitation Detection in Automotive Torque Converters using Nearfield Acoustical Measurements,” SAE Noise & Vibration Conference and Exhibition, May 2005, Traverse City, MI, SAE paper number 2005-01-2516.
  • Dhaliwal, A.S., Parker, G.G., and Blough, J.R., “Active Structural Acoustic Control of Road Noise in a Passenger Vehicle,” International Journal of Vehicle Autonomous Systems, Special Issue on Intelligent Vehicle Systems, Volume 2, Numbers 3 & 4, pp. 168-188, 2004.
  • Blough J.R. “A Survey of DSP Methods for Rotating Machinery Analysis, What is Needed, What is Available,” Special Edition of Journal of Sound and Vibration from India-USA Symposium 2001—Emerging Trends in Vibration and Noise Engineering, Dec. 2001.

Bo Chen

Chang Kyoung Choi

  • Liggett, Jason L., Choi, Chang Kyoung, Donnell, Robert L., Kihm, Kenneth D., Kim, Jong-Sik, Min, Kyung-Won, Noegel, Angelika Anna, Baek, Seung Joon, 2014, “Nonsteroidal Anti-inflammatory Drugs Suppress Structural Protein Nesprin-2 Expression in Colorectal Cancer Cells,” Biochimica et Biophysica Acta (BBA), Vol.1840 (1), pp. 322-331, DOI:10.1016/j.bbagen.2013.09.032.
  • DH Shin, J. Allen, C.K. Choi, YT Kang, SH Lee, Fringe Pattern Visualization along the Contact Line during Nanofluid Drop Evaporation, Journal of Heat Transfer, 136, 080913, 2014 (August), [Corresponding author]
  • T. Shokuhfar, Azhang Hamlekhan, J.Y. Chang, C.K. Choi, C. Sukotjo, C. Friedrich, Biophysical Evaluation of Cells on Nanotubular Surfaces: The Effects of Atomic Ordering and Chemistry, International Journal of Nanomedicine, 9 (1), 3737-3748, 2014 (August)
  • JB Lee, JW Lee, SH Lee, YT Kang, C.K. Choi, Dependency of Condensation Forms on Wettability, Journal of Heat Transfer, 136, 080911, 2014 (August), [Corresponding author]
  • JY Jung, YT Kang, C.K. Choi, Detection & Collection of Bacteria in an Evaporating Sessile Droplet, Journal of Heat Transfer, 136, 080902, 2014 (August), [Corresponding author]
  • J. Chang, S. Wang, J. Allen, SH Lee, ST Chang, YK Choi, C. Friedrich, C.K. Choi, A Novel Dynamic Cell Culture System using Electro-Osmosis Diode pumping, Biomicrofluidics, 8, 044116, 2014, [Corresponding author]
  • HR Gwon, ST Chang, C.K. Choi, JY Jung, JM Kim, SH Lee, Development of a New Contactless Dielectrophoresis System for Active Particle Manipulation using Movable Liquid Electrode, Electrophoresis, 2014 (July), [Corresponding author]
  • DH Shin, C.K. Choi, YT Kang, SH Lee, Local aggregation characteristics of a nanofluid droplet during evaporation, International Journal of Heat and mass Transfer, 72, 336-344, 2014 (May)
  • M. Ha, J. Lee, C.K. Choi, J. Kim, Y. Choi, Understanding the Structure of Table-Type Dolmens Using Numerical Analysis, Journal of Mechanical Science and Technology, 28 (5), 1789-1795, 2014 (May)
  • I Pineda, C.K. Choi, YT Kang, CO2 gas absorption by CH3OH based nanofluid in an annular contractor at low rotational speeds, International Journal of Greenhouse Gas Control, 23, 105-112, 2014 (April)
  • Chevres, Lee Roy, Shin, Dong Hwan, Hernandez, Joseph, Choi, Chang Kyoung, Allen, Jeffrey S., Lee, Seong-Hyuk, 2013, “Fringe Pattern Visualization of Contact Lines during Evaporation of Nanofluid Droplets,” Journal of Heat Transfer, Vol. 135 (8) (080912), Article No. HT-13-1138, 1 page, DOI: 10.1115/1.4024194.
  • Kumar, Arun, Takatsuki, Hideyo, Choi, Chang Kyoung, Sen, Ayusman, Blough, Eric, 2013, “Glucose Driven Catalytic Nanomotor to Create Motion at Micro Scale,” Journal of Biotech Research [ISSN: 1944-3285], Vol. 5, pp.35-39.

William J. Endres

  • Endres, William, Kountanya, Raja K., 2004, "Flank Wear of Edge-Radiused Cutting Tools Under Ideal Straight-Edged Orthogonal Conditions," Journal of Manufacturing Science and Engineering, Vol. 126, No. 3, pp. 496-505.
  • Endres, William, Corpus, William T., 2004, "Added Stability Lobes in Machining Processes That Exhibit Periodic Time Variation, Part 1: An Analytical Solution," Journal of Manufacturing Science and Engineering, Vol. 126, No. 3, 467-474.
  • Endres, William, Corpus, William T., 2004, "Added Stability Lobes in Machining Processes That Exhibit Periodic Time Variation, Part 2: Experimental Validation," Journal of Manufacturing Science and Engineering, Vol. 126, No. 3, pp. 475-480.
  • Endres, William, Kountanya, R. K., 2003, "The Effects of Corner Radius and Edge Radius on Tool Flank Wear," Journal of Manufacturing Processes, Vol. 5.
  • Manjunathaiah, J., and Endres, W. J., "A New Model and Analysis of Orthogonal Machining with an EdgeRadiused Tool," ASME J. Mfg. Sci and Engg., 122, 384-90, 2000.
  • Chiu, W: C., Endres, W. J., and Thouless, M. D., "An Experimental Study of Chip Formation and Surface Formation during Orthogonal Machining of Homogeneous Brittle Materials;" J Mach. Sci. and Tech., 4, 253-75, 2000.
  • Schimmel, R. J., Endres, W. J., and Stevenson, R., "The Application of an Internally Consistent Material Model to Determine the Effect of Zero Clearance in Orthogonal Machining," J. Mach. Sci. and Tech., 4, 101-25, 2000.

Craig Friedrich

John K. Gershenson

  • Gershenson, John, Ye, X., 2009, "Focused Product Family Design Based on the Commonality and Variety Tradeoff," International Journal of Mass Customisation, Vol. 3, No. 2, pp. 179-207.
  • Gershenson, John, Ye, X., Thevenot, H., Alizon, F., Khadke, K., Simpson, T.W., and Shooter, S., 2009, "Using Product Family Evaluation Graphs in Product Family Design," International Journal of Production Research, Vol. 47, No. 13, pp. 3559-3585.
  • Gershenson, John, Ye, X., Thevenot, H.J., Alizon, F., Khadke, K., Simpson, T.W., and Shooter, S.B., 2008, "Attribute-based Clustering Methodology for Product Family Design," Journal of Engineering Design, Vol. 19, No. 6, pp. 571-586.
  • Gershenson, John, Lai, X., 2008, "Representation of Similarity and Dependency for Assembly Modularity,” The International Journal of Advanced Manufacturing Technology, Volume 37, Numbers 7-8, pp. 803-827.
  • Gershenson, John, Alizon, Fabrice, Thevenot, Henri J., Marion, Tucker J., Shooter, Steven B., Simpson, Timothy W., 2007, "Frameworks for Product Family Design and Development," Concurrent Engineering, Vol. 15, No. 2, pp. 187-199.
  • Gershenson, John, Guo, Fang, 2007, "Discovering Relationships between Modularity and Cost," Journal of Intelligent Manufacturing, Vol. 18, No. 1, pp. 143-157.
  • Gershenson, John, Khadke, K., 2007, "Technology-Driven Product Platform Development," International Journal of Product Development, Special Issue on Innovative Concepts in the Perspective of maximizing the Utilization Rate and Value of Durable Goods, Vol. 6, No. 3-4, pp. 353-374.
  • Gershenson, John, Clarke, A., 2007, "Life-cycle Design."
  • Gershenson, John, Pavnaskar, S.J., 2007, "Educating Tomorrow's Professors: Integrating Background Research and Course Development," iNEER Innovations 2007: World Innovations in Engineering Education and Research, Begell House Publishing, pp. 127-138.
  • Gershenson, John, Michalek, Donna, Jiao, J., 2007, "Managing Modularity and Commonality in Product and Process Development," Concurrent Engineering, Vol. 15, June, pp. 81-83.
  • F. Guo and J.K. Gershenson (2006). “Discovering Relationships between Modularity and Cost.” Journal of Intelligent Manufacturing, Volume 17, No. 1.
  • Pavnaskar, S.J. and J.K. Gershenson (2005). “Application of Value Stream Mapping to Lean Engineering.” International Journal of Advanced Manufacturing Systems, Volume 8, No. 1.
  • X. Ye, J.K. Gershenson, K. Khadke, X. Lai, F. Guo (2005). “An Introduction to Product Family Evaluation Graphs.” Proceedings of the 2005 ASME Design Engineering Technical Conferences – 17th International Conference on Design Theory and Methodology, Long Beach, California, September.
  • Gershenson, J.K., G.J. Prasad, and Y. Zhang (2004). “Product Modularity: Measures and Methods.” Journal of Engineering Design, Volume 15, Number 1.
  • Guo, F. and J.K. Gershenson (2003). “Comparison of Modular Measurement Methods based on Consistency Analysis and Sensitivity Analysis.” Proceedings of the 2003 ASME Design Engineering Technical Conferences – 15th International Conference on Design Theory and Methodology, Chicago, Illinois, September.
  • Pavnaskar, S.J., J.K. Gershenson, and A.B. Jambekar (2002). “A Classification Scheme for Lean Manufacturing Tools.” International Journal of Production Research, Volume 41, Number 13.
  • Gershenson, J.K., B.D. Solomon, D.R. Shonnard, D.W. Watkins, and J.W. Sutherland (2001). “Decision Making in the Face of Uncertainty about Global Climate Change Policy.” Proceedings of the ASME International Mechanical Engineering Congress and Exposition, New York, November 10-1.

Mahesh Gupta

Gopal Jayaraman

  • Jayaraman, Gopal, Struthers, A., 2010, "Elastic Stability of Columns on Partial Elastic Foundations Under Subtangential Loading," Journal of Sound and Vibration, Vol. 329, Issue 18, pp. 3856-3865.
  • Jayaraman, Gopal, Struthers, A., 2005, "Divergence and Flutter Instability of Elastic Specially Orthotropic Plates Subject to Follower Forces," Journal of Sound and Vibration, Vol. 281, No. 1-2, pp. 357-373.
  • Jayaraman, Gopal, Haut, R.C., Sinnott, M.T., Smith, E.E., Meyer, E.G., 2004, "The Effect of Axial Load in the Tibia on the Response of the 90° Flexed Knee to Blunt Impacts With a Deformable Interface," Stapp Car Crash Journal, Vol. 48, pp. 1-20.
  • Jayaraman, Gopal, Schuster P.J., Chore C.C., Prasad P., 2004, "Development and Validation of the Finite element Model for the Human Lower Limb of Pedestrians," Stapp Car Crash Journal , Vol. 44, pp. 315-334.
  • Jayaraman, Gopal, Chua, C.P., Edmunds, J.L., Girod, D.A., Toby, E.B., Bowers, K.W., 2000, "Osteocutaneous Radial Forearm Free Flaps," Journal of Bone and Joint Surgery, Vol. 82-A, No. 5, pp. 694-704.
  • E. Bruce Toby, James Rotramel, Gopal Jayaraman, Allen Struthers: Changes in the Stress Relaxation Properties of Peripheral Nerves After Transection. The Journal of Hand Surgery, Vol. 24A, No. 4, pp
  • Gopal Jayaraman, Aniruddha A. Nazre, John B. Redford, and Valerie McCann: A Computerized Technique for Analysis of Lateral Bending Behavior of the Normal and Impaired Lumbar Spine. Spine, Vol. 19, No. 7, pp. 824-832, 1994.
  • Butler, T.E., Asher, M.A., Jayaraman, G., Nunnely, P.D., and Robinson, R.G.: Strength and Stiffness of Thoracic Implant Anchors in Osteoporotic Spines. Spine, Vol. 19, pp. 1956-1962, 1994.

L. Brad King

  • Hopkins, Mark A., King, Lyon B., 2014, “Assessment of Plasma Impedance Probe for Measuring Electron Density and Collision Frequency in a Plasma with Spatial and Temporal Gradients,” Physics of Plasmas, Vol. 21 (5), Article No. 053501, 11 pages, DOI: 10.1063/1.4874321.
  • Hopkins, Mark A., King, Lyon B., 2014, “Magnesium Hall thruster with Active Thermal Mass Flow Control,” Journal of Propulsion and Power, Vol. 30(3), pp.637-644, DOI: 10.2514/1.B34888.
  • Washeleski, Robert L., Meyer, Edmond J., King, Lyon B., 2013, “Application of Maximum Likelihood Methods to Laser Thomson Scattering Measurements of Low Density Plasmas,” Review of Scientific Instruments, Vol. 84 (10), Article No. 105101, 9 pages, DOI: 10.1063/1.4821980.
  • King, Lyon (Brad), Makela, Jason M., Washeleski, Robert L., 2009, "Re-generable Field Emission Cathode For Spacecraft Neutralization," Journal of Propulsion and Power, Vol. 25, No. 4, Pages 970-975.
  • King, Lyon (Brad), Fossum, E.C., 2008, "An Electron Trap for Studying Cross-Field Mobility in Hall Thrusters," IEEE Transactions on Plasma Science, Vol. 36, No. 5, pp. 2088-2094.
  • King, Lyon (Brad), Sommerville, J.D., Chiu, Y.-H., and Dressler, R.A., 2008, "Ion-Collision Emission Excitation Cross Sections for Xenon Electric Thruster Plasmas," AIAA Journal of Propulsion and Power, Vol. 24, No. 4, pp. 880-888.
  • King, Lyon (Brad), Massey, D.R., Makela, J.M., 2008, "Bismuth Hollow Cathode for Hall Thrusters," Journal of Propulsion and Power, Vol. 24, No. 1, pp. 142-146.
  • King, Lyon (Brad), Massey, D., Kieckhafer, A.W., 2007, "Performance and Active Thermal Control of a 2-kW Hall Thruster with Segmented Electrodes,” AIAA Journal of Propulsion and Power, Vol. 23, No. 4, pp. 821-827.
  • King, Lyon (Brad), Kieckhafer, A.W., 2007, "Energetics of Propellant Options for High-power Hall Thrusters," AIAA Journal of Propulsion and Power, Vol. 23, No. 1, pp. 21-25.
  • King, Lyon (Brad), Parker, Gordon, Schaub, H., Natarajan, A., 2007, "Coulomb Force Virtual Space Structures," ESA SP-633, Noordwijk: ESA Publications Division, pp. 39-44.
  • King, Lyon (Brad), Fossum, E.C., 2006, "Cross-field Mobility in a Pure Electron Plasma," Problems of Atomic Sciences and Technology, No. 6, Series: Plasma Physics, Vol. 12, pp. 219-221.
  • King, L. B. and Gallimore, A. D., "Ion Energy Diagnostics in the Plasma Exhaust Plume of a Hall Thruster," Journal of Propulsion and Power, Vol. 16, No. 5, September-October 2000.
  • King, L. B. and Gallimore, A. D., "Identifying Charge-exchange Collision Products within the Ion-energy Distribution of Electrostatically Accelerated Plasmas," Physics of Plasmas, Vol. 6, No. 7, pp. 2936-42, July 1999.
  • # King, L. B., Gallimore, A. D., and Marrese, C. M., "Transport-property Measurements in the Plume of an SPT-100 Hall-effect Thruster," Journal of Propulsion and Power, Vol. 14, No. 3, pp. 327-35, May-June 1998.
  • King, L. B. and Gallimore, A. D., "Gridded Retarding Pressure Sensor for Ion and Neutral Particle Analysis in Flowing Plasmas," Review of Scientific Instruments, Vol. 68, No. 2, February 1997.

Seong-Young Lee

  • Hai-Wen Ge, Michael Norconk, Seong-Young Lee, Jeffrey Naber, Steve Wooldridge, James Yi, “PIV measurement and numerical simulation of fan-driven flow in a constant volume combustion vessel,” Applied Thermal Engineering 64:19-31, 2014.
  • Naber, Jeffrey, Lee, Seong-Young, Johnson, Jaclyn, Ge, Hai-Wen, Kurtz, Eric, Nan, R., 2013, "Investigation of Key Mechanism for Liquid Length Fluctuations in Transient Vaporizing Diesel Sprays using Experimental Results and CFD Modeling," SAE International Journal of Engines, Vol. 6, No. 2, pp. 1202-1212.
  • Anqi Zhang, Khanh Cung, Seong-Young Lee, Jeffrey Naber, Garlan Huberts, Michael Czekala, and Qiuping Qu, “The Impact of Spark Discharge Pattern on Flame Initiation in a Turbulent Lean and Dilute Mixture in a Pressurized Combustion Vessel,” SAE Int. J. Engines 6(1):2013, doi:10.4271/2013-01-1627.
  • Naber, Jeffrey, Lee, Seong-Young, Meijer, Maarten, Somers, L.M.T., Johnson, Jaclyn, Malbec, L.M., Bruneaux, Gilles, Pickett, Lyle, Bardi, M., Payri, Raul, Bazyn, Tim, 2012, "Engine Combustion Network (ECN): Characterization and Comparison of Boundary Conditions for Different Combustion Vessels," Atomization and Sprays, Vol. 22, No. 9, pp. 777-806.
  • Johnson, Jaclyn, Naber, Jeffrey D., and Lee, Seong-Young, 2012, "Characterizing Diesel Fuel Spray Cone Angle from Back-Scattered Imaging by Fitting Gaussian Profiles to Radial Spray Intensity Distributions," Journal of Engineering for Gas Turbines and Power, Vol. 134, No. 6, Article ID 062802, 8 pages.
  • Lee, Seong-Young, Litzinger, T., Colket, M., Kahandawala, M., Liscinsky, D., McNesby, K., Pawlik, R., Roquemore, M., Santoro, R., Sidhu, S., and Stouffer, S., 2011, "Fuel Additive Effects on Soot across a Suite of Laboratory Devices, Part 2: Nitroalkanes," Combustion Science and Technology Vol. 183, No. 8, pp. 739-754.
  • Naber, Jeffrey, Lee, Seong-Young, Nesbitt, Jaclyn E., Johnson, Samuel E., Pickett, Lyle M., Siebers, Dennis L., 2011, "Modeling Minor Species Including NO and OH Resulting from Preburn in a Constant Volume Combustion Vessel and Their Impact on the Subsequent Ignition Delay of n-Heptane," Energy Fuels, Vol. 25, No.3, pp. 926-936.
  • Lee, Seong-Young, Ding, Nan, Arora, Rajat, Norconk, Michael, 2011, "Numerical Investigation of Diluent Influence on Flame Extinction Limits and Emission Characteristic of Lean-Premixed H2-CO (syngas) Flames," International Journal of Hydrogen Energy Vol. 36, No. 4, pp. 3222-3231.
  • Lee, Seong-Young, Bouvet, N., Chauveau, C., Gokalp, I., Santoro, R.J., 2011, "Characterization of Syngas Laminar Flames Using the Bunsen Burner Configuration," International Journal of Hydrogen Energy, Volume 36, Issue 1, pp. 992-1005.
  • Jeffrey Naber, Seong-Young Lee, Jaclyn Johnson, "Characterizing Diesel Fuel Spray Cone Angle from Back-Scattered Imaging by Fitting Gaussian Profiles to Radial Spray Intensity Distributions," Journal of Engineering for Gas Turbines and Power, Vol. 134, No. 6, Article ID 062802, 8 pages, 2011-00-00
  • S. Seo and S.-Y. Lee, “Effects of Unmixedness on Combustion Instabilities in a Lean-Premixed Gas Turbine Combustor,” Flow, Turbulence and Combustion 85: 95-112, 2010.
  • A. Mensch, R. Santoro, T. Litzinger, and S.-Y. Lee, “Sooting Characteristics of Surrogates for Jet Fuels,” Combustion and Flame 157:1097-1105, 2010
  • Seong-Young Lee, Litzinger, T., Colket, M., Kahandawala, M., Katta, V., Liscinsky, D., McNesby, K., Pawlik, R., Roquemore, W., Santoro, R., Sidhu, S., Stouffer, S., Wu, J. , "Fuel Additive Effects on Soot across a Suite of Laboratory Devices, Part 1: Ethanol ," Combustion Science and Technology, Vol. 181, No. 2, pp. 310 - 328, 2009-02-00
  • S.-Y. Lee, S.R. Turns, and R.J. Santoro, “Measurement of Soot, OH Radical and PAH Concentrations in Turbulent Ethylene/Air Jet Flames,” Combustion and Flame 156: 2264-2275, 2009.
  • V. Katta, W. Roquemore, A. Menon, S.-Y. Lee, R. Santoro, and T. Litzinger, “Impact of Soot on Flame Flicker,” Proceedings of the Combustion Institute 32: 1343-1350, 2009.
  • Seong-Young Lee, Balster, L., Coporan, E., Dewitt, M., Edwards, T., Ervin, J., Graham, J., Pal, S., Phelps, D., Rudnick, L., Santoro, R., Schobert, H., Shafer, L., Striebich, R., West, Z., Wilson, G., Woodward, R., Zabarnick, S., "Development of an Advanced, Thermally Stable, Coal-based Jet Fuel," , 2008-04-00

Edward Lumsdaine

  • Lumsdaine, Edward, Binks, M., 2006, "Entrepreneurship from Creativity to Innovation," 206 pages.
  • Lumsdaine, Edward, Binks, M., 2003, "Keep on Moving! Entrepreneurial Creativity and Effective Problem Solving," McGraw-Hill Higher Education.
  • Lumsdaine, Edward, Lumsdaine, M., Shelnutt, J.W., 1999, "Creative Problem Solving and Engineering Design," McGraw-Hill Higher Education.
  • Lumsdaine, Edward, Lumsdaine, M., 1998, "Prerequisites for Organizational Innovation," Chapter 2 in Break-Out Creativity (Rick Crandall, ed.).
  • Lumsdaine, Edward, Lumsdaine, M., 1995, "Thinking Preferences of Engineering Students: Implications for Curriculum Restructuring," Journal of Engineering Education, Vol. 84, No. 2, pp. 193-204.
  • Lumsdaine, Edward, Lumsdaine, M., 1995, "Creative Problem Solving: Thinking Skills for a Changing World," McGraw-Hill.

Nina Mahmoudian

  • Rastgaar, Mohammad, and Mahmoudian, Nina, "Robustness of Orthogonal Eigenstructure Control to Actuators Failure" Nonlinear Approaches in Engineering Applications 2, Editors: R.N. Jaza and L. Dai, Springer, New York, pp. 137-166, ISBN: 978-1-4614-6877-6, DOI; 10.1007/978-1-4614-6877-6 5.
  • Mitchell B., Wilkening E., and Mahmoudian N., 2013, “Underwater Gliders for Lake Marine Research,” American Control Conference, Washington, DC, June 17-19, 2013.
  • Mitchell B., Wilkening E., and Mahmoudian N., 2013, “Developing an Educational Underwater Glider,” International Conference on Robotics and Automation, Karlsruhe, Germany, May 6-10, 2013.
  • Weaver W., Mahmoudian N., and Parker G., 2012, “Autonomous Mobile Power Blocks for Prepositioned Power Conversion and Distribution,” TARDEC Ground Vehicle Systems Engineering and Technology Symposium, Dearborn, MI, August 14-16, 2012.
  • Mahmoudian, N., and Paley, D. A., 2011, “Synchronization on the N-torus with noisy measurements,” American Control Conference, San Francisco, CA, June 29-July 1, 2011.
  • Mahmoudian, N., Woolsey, C., and Geisbert, J., 2010, “Approximate Analytical Turning Conditions for Underwater Gliders: Implications for Motion Control and Path Planning,” IEEE Journal of Oceanic Engineering, Vol. 35, No. 1, pp. 131-143.
  • Mahmoudian, N., and Woolsey, C., 2009, “Analysis of Feedforward/Feedback Control Design for Underwater Glider Based on Slowly Varying Systems Theory,” AIAA Guidance, Navigation and Control Conference and Exhibit, Chicago, IL, August 10-13, 2009.
  • Jazar, G. N., Mahinfalah, M., Mahmoudian, N., and Rastgaar Aagaah, M., 2009, “Effects of Nonlinearities on the Steady State Dynamic Behavior of Electric Actuated Microcantilever-Based Resonators,” Journal of Vibration and Control, Vol. 15, No. 9, pp. 1283-1306.
  • Mahmoudian, N., and Woolsey, C., 2008, “Underwater Glider Motion Control,” 47th IEEE Conference on Decision and Control, Cancun, Mexico, Dec 9-11, 2008.

Scott A Miers

  • Anderson, Jeremy J., Rask, Erik, Lohse-Busch, Henning, Miers, Scott A., 2014, “A Comparison of Cold-Start Behavior and its Impact on Fuel Economy for Advanced Technology Vehicles,” SAE International Journal of Fuels and Lubricants, SAE Paper No. 2014-01-1375, Vol. 7(2), pp. 427-435, DOI: 10.4271/2014-01-1375.
  • Madison, Daniel P., Miers, Scott A., Barna, Glen L., Richerson, Jay L., 2013, “Comparison of Piston Temperature Measurement Methods: Templug Versus Wireless Telemetry with Thermocouples,” ASME Journal of Engineering for Gas Turbines and Power, Vol. 135(6), Article No. 061602, 8 pages, DOI: 10.1115/1.4023493.
  • Lawyer, K., Ickes, A., Wallner, T., Ertl, D., Williamson, R., Miers, S. A., Naber, J. D. (2013). "Blend Ratio Optimization of Fuels Containing Gasoline Blendstock, Ethanol, and Higher Alcohols (C3-C6): Part II - Blend Properties and Target Value Sensitivity," SAE International 2013-01-1126.
  • Wallner, Thomas and Miers, Scott A., 2012, "Alternative Fuels for Internal Combustion Engines," Encyclopedia of Sustainability Science and Technology, Springer Science+Business Media, New York, New York, ISBN 978-0387894690
  • Rittenour, M. D., Weber, J. C., Miers, S. A. (2012). "Assessing the Effect of E22 Fuel on Two-Stroke and Four-Stroke Snowmobile Performance and Emissions," ASME Internal Combustion Engine Division Fall Technical Conference ICEF2012-92185.
  • Wiegand, A. L., Miers, S. A., Blough, J. R., Kowalski, D. I., Biske, A. (2012). "Development of a Micro-Engine Testing System," SAE Small Engine Technology Conference 2012-32-0105.
  • Johnson, Jaclyn, Worm, Jeremy J., Miers, Scott A., and Naber, Jeffrey D., 2011, "Biofuel Use from Bioenergy Crops: Internal Combustion Engines in Transportation," Handbook of Bioenergy Crop Plants, CRC Press, Boca Raton, Florida, ISBN 9781439816844.
  • Miers, Scott, Chmielewski, Matt, 2010, "Measurement of Regulated and Unregulated Exhaust Emissions from Snowmobiles in the 2009 SAE Clean Snowmobile Challenge," SAE International Journal of Fuels and Lubricants, Vol. 3, No. 2, pp. 1112-1121.
  • Miers, Scott, Wallner, T., Scarcelli, R., Lohse-Busch, H.R.A., Wozny, B.M., 2010, "Safety Considerations for Hydrogen Test Cells," 3rd ICHS Conference on Hydrogen Safety.
  • Naber, Jeffrey, Miers, Scott, Moscherosch, Benjamin W., Polonowski, Christopher J., 2010, "Combustion and Emissions Characterization of Soy Methyl Ester Biodiesel Blends in an Automotive Turbocharged Diesel Engine," ASME Journal of Engineering for Gas Turbines and Power, Volume 132, Issue 9.
  • Wallner, T., Miers. S.A., McConnell, S.S., “A Comparison of Ethanol and Butanol as Oxygenates Using a Direct-Injection, Spark-Ignition (DISI) Engine,” 2008 ASME Internal Combustion Engine Division Spring Technical Conference, Chicago, Illinois, ICES2008-1690.
  • Miers, S. A., Barna, G. L., Anderson, C. L., Blough, J. R., Inal, M. K., Ciatti, S. A., “A Wireless Microwave Telemetry Data Transfer Technique for Reciprocating and Rotating Components,” ASME Journal of Engineering for Gas Turbines and Power, GTP-06-1228, Vol.130, Issue. 2, 2007.
  • Miers, S. A., Kastengren, A. L., El-Hannouny, E. M., Longman, D. E., “An Experimental Investigation of Biodiesel Injection Characteristics Using a Light-duty Diesel Injector”, 2007 ASME Internal Combustion Engine Division Fall Technical Conference, Charleston, South Carolina, ICEF2007-1735.
  • Miers, S. A., Ng, H., Ciatti, S. A., Stork, K., “Combustion Analysis Comparison of SunDiesel and Conventional Diesel in a LD Engine”, 2005 SAE Powertrain and Fluid Systems Conference, San Antonio, TX, SAE 2005-01-3670.

Michele H. Miller

Ibrahim Miskioglu

Jeffrey D. Naber

  • Jia, Libin, Blough, Jason R., Naber, Jeffrey D., Zekavat, Seyed A., 2014, "Accelerometer-Based Combustion Metrics Reconstruction With Radial Basis Function Neural Network for a 9 L Diesel Engine,” Journal of Engineering for Gas Turbines and Power, Vol. 13(3), March 1, 2014, Article No. 031507, 9 pages, DOI: 10.1115/1.4025886.
  • Johnson, Jaclyn, Ge, Hai-Wen, Naber, Jeffrey D., Lee, Seong-Young, Kurtz, Eric, and Nan R., 2013, "Investigation of Key Mechanism for Liquid Length Fluctuations in Transient Vaporizing Diesel Sprays using Experimental Results and CFD Modeling," SAE International Journal of Engines, Vol. 6, No. 2, pp. 1202-1212.
  • Meijer, Maarten, Somers, L.M.T., Johnson, Jaclyn, Naber, Jeffrey D., Lee, Seong-Young, Malbec, L.M., Bruneaux, Gilles, Pickett, Lyle, Bardi, M., Payri, Raul, and Bazyn, Tim, 2012, "Engine Combustion Network (ECN): Characterization and Comparison of Boundary Conditions for Different Combustion Vessels," Atomization and Sprays, Vol. 22, No. 9, pp. 777-806.
  • Johnson, Jaclyn, Naber, Jeffrey D., and Lee, Seong-Young, 2012, "Characterizing Diesel Fuel Spray Cone Angle from Back-Scattered Imaging by Fitting Gaussian Profiles to Radial Spray Intensity Distributions," Journal of Engineering for Gas Turbines and Power, Vol. 134, No. 6, Article ID 062802, 8 pages.
  • Johnson, Jaclyn, Worm, Jeremy J., Miers, Scott A., and Naber, Jeffrey D., 2011, "Biofuel Use from Bioenergy Crops: Internal Combustion Engines in Transportation," Handbook of Bioenergy Crop Plants, CRC Press, Boca Raton, Florida, ISBN 9781439816844.
  • Naber, Jeffrey, Worm, Jeremy, Yeliana, Yeliana, Cooney, Christopher, Michalek, Donna J., 2011, "Estimation of Double-Wiebe Function Parameters using Least Square Method for Burn Durations of Ethanol-Gasoline Blends in Spark Ignition Engine over Variable Compression Ratios and EGR Levels," Applied Thermal Engineering, Vol. 31, No. 14-15, pp. 2213-2220.
  • Naber, Jeffrey, Lee, Seong-Young, Nesbitt, Jaclyn E., Johnson, Samuel E., Pickett, Lyle M., Siebers, Dennis L., 2011, "Modeling Minor Species Including NO and OH Resulting from Preburn in a Constant Volume Combustion Vessel and Their Impact on the Subsequent Ignition Delay of n-Heptane," Energy Fuels, Vol. 25 (3), pp. 926-936.
  • Jeffrey Naber, Scott Miers, Benjamin W. Moscherosch, Christopher J. Polonowski, "Combustion and Emissions Characterization of Soy Methyl Ester Biodiesel Blends in an Automotive Turbocharged Diesel Engine," ASME Journal of Engineering for Gas Turbines and Power, Volume 132, Issue 9, 2010-09-00
  • Jeffrey Naber, Abhijit, "Ionization Signal Response during Combustion Knock and Comparison to Cylinder Pressure for SI Engines," SAE International Journal of Passenger Cars- Electronic and Electrical Systems, Vol. 1, No. 1, pp. 349-364, 2009-04-00
  • Jeffrey Naber, Mathur, V. K, Moscherosch, B. W., Polonowski, C. J., " Application and comparison of soy based biodiesel fuel to ultra low sulfur diesel fuel in a HPCR diesel engine - Part II: combustion and emissions," Journal of KONES, Powertrain & Transportation, Volume 15, Issue 4, Pages 311-320, 2008-12-31
  • Jeffrey Naber, Yeliana, Worm, J., "Property Determination for Ethanol-Gasoline Blends with Application to Mass Fraction Burn Analysis in a Spark Ignition Engine," Journal of KONES, Powertrain & Transportation, Vol. 15, No. 2, pp. 553-561, 2008-01-00
  • Jeffrey Naber, Yeliana, Cooney, C., and Worm, J., "Wiebe Function Parameter Determination for Mass Fraction Burn Calculation in an Ethanol-Gasoline Fuelled SI Engine," Journal of KONES, Powertrain & Transportation, Vol. 15, No. 3, pp. 567-574, 2008-01-00
  • Jeffrey Naber, Mathur, V.K., Moscherosch, B.W., and Polonowski, C.J., "Application and Comparison of Soy Based Biodiesel Fuel to Ultra Low Sulfur Diesel Fuel in a HPCR Diesel Engine - Part I: Engine Performance Parameters," Journal of KONES, Powertrain & Transportation, Vol. 15, No. 3, pp. 327-334, 2008-01-00
  • Jeffrey Naber, Mathur, V.K., Moscherosch, B.W., and Polonowski, C.J., "Application and Comparison of Soy Based Biodiesel Fuel to Ultra Low Sulfur Diesel Fuel in a HPCR Diesel Engine - Part II: Combustion and Emissions," Journal of KONES, Powertrain & Transportation, Vol. 15, No. 4, pp. 311-320, 2008-01-00
  • Jeffrey Naber, Szwaja, S., "Impact of Leaning Hydrogen-Air Mixtures on Engine Combustion Knock," Journal of KONES, Powertrain & Transportation, Vol. 15, No. 2, pp. 483-491, 2008-00-00
  • Liu, L.Y., Yang, H., Plee, S., Naber, J.D., “Windowed Selected Moving Autocorrelation (WSMA) Tri-Correlation (TriC), and Misfire Detection,” SAE Paper 05P-5762, 2005.
  • Naber, J.D., and Siebers,D.L., “Effects of Gas Density and Vaporization on Penetration and Dispersion of Diesel Sprays,” SAE Paper 960034.
  • Naber, J.D., and Siebers, D.L., “Autoignition of Hydrogen Under Direct-Injection Compression-Ignition Engine Conditions,” CSS/WSS/MNS of the Comb. Inst. 95S093, 1995.
  • Naber, J.D., Siebers, D.L., Di Julio, S.S., and Westbrook, C.K., “Effects of Natural Gas Composition on Ignition Delay Under Diesel Conditions,” Combustion and Flame, Vol. 99, pp. 192-200, 1994.

Amitabh Narain

Gregory M. Odegard

Gordon G. Parker

Fernando Ponta

  • Ponta, Fernando, Otero, A., 2009, "On the structural behavior of variable-geometry oval-trajectory Darrieus wind turbines," Renewable Energy, Vol. 34, No. 3, pp. 827-832.
  • Ponta, Fernando, Lago, L.I., 2008, "Analysing the Suspension System of VGOT-Darrieus Wind Turbines," Energy for Sustainable Development, Vol. 12, No. 2, pp. 5-16.
  • Ponta, Fernando, Jacovkis, P., 2008, "Marine-current Power Generation by Diffuser-augmented Floating Hydro-turbines,” Renewable Energy, Vol. 33, No. 4, pp. 665-673.
  • Ponta, Fernando, Seminara, J., Otero, A., 2007, "On the Aerodynamics of Variable-Geometry Oval-Trajectory Darrieus Wind Turbines," Renewable Energy, Elsevier, Vol. 32, No. 1, pp. 35-56.
  • Ponta, Fernando, 2006, "Kinematic Laplacian Equation Method: A Velocity-Vorticity Formulation for the Navier-Stokes Equations," Journal of Applied Mechanics, Transactions of the ASME, Vol. 73, pp. 1031-1038.
  • Ponta, Fernando, 2006, "Effect of Shear-layer Thickness on the Strouhal-Reynolds Number Relationship for Bluff-body Wakes,” Journal of Fluids and Structures, Vol. 22, No. 8, pp. 1133-1138.
  • Ponta, Fernando, Aref, H., 2006, "Numerical Experiments on Vortex Shedding from an Oscillating Cylinder," Journal of Fluids and Structures, Vol. 22, No. 3, pp. 327-344.
  • Ponta, F., 2005, “The Kinematic Laplacian Equation Method,” Journal of Computational Physics, Academic Press, Vol. 207, pp. 405-426.
  • Ponta, F., Aref, H., 2005, “Vortex synchronization regions in shedding from oscillating cylinders,” Physics of Fluids, American Institute of Physics, Vol. 17, p. 011703.
  • F. Ponta, H. Aref; “Strouhal-Reynolds Number Relationship for Vortex Streets”; Physical Review Letters, American Physical Society; 2004, Vol. 93, p. 084501.
  • F. Ponta, P. Jacovkis; “A Vortex Model for Darrieus Turbine Using Finite Element Techniques”; Renewable Energy, Elsevier; 2001, Vol. 24, 1-18

William W. Predebon

  • Predebon, William, Sutherland, John W., Shapton, William, Zenner, P.F., Banks-Sikarskie, M.A., Artman, L.A., and Lins, P.A., 2001, "From the Classroom to the Boardroom: Distance Learning Undergraduate and Graduate Engineering Programs, A Global Partnership of Industry and Academia," International Conference on Engineering Education Proceedings (CD Format), Oslo, Norway, August 6-10, 2001, pp. 1-6.
  • Predebon, William, White, C.L., Wathne, E., and Larsen, P.K., 2001, "An International Industry/University Collaboration: Norsk Hydro Michigan Tech/NTNU," International Conference on Engineering Education Proceeding (CD Format), Oslo, Norway, August 6-10, 2001, p. 4.
  • Predebon, William, Staehler, J.M., Pletka, B.J., and Subhash, G., 2000, "Micromechanisms of Deformation in High-purity Hot-pressed Alumina," Materials Science and Engineering A, Vol. 291, No. 1-2, pp. 37-45.
  • Anderson, Carl, Predebon, William, Lankford, J., Pletka, B. J., Staehler, J. M., Subhash, G., 1998, "The Role of Plasticity as a Limiting Factor in the Compressive Failure of High Strength Ceramics," Mechanics of Materials Vol. 29, Issues 3-4, August 1998, pp. 205-218.
  • Predebon, William, Staehler, J.M., Pletka, B.J., and Subhash, G., 1995, "Strain-Rate Effects in High-Purity Alumina," JOM, Vol. 47, No. 5, pp. 60-63.

Mo Rastgaar

  • Rastgaar, Mohammad, and Mahmoudian, Nina, "Robustness of Orthogonal Eigenstructure Control to Actuators Failure" Nonlinear Approaches in Engineering Applications 2, Editors: R.N. Jaza and L. Dai, Springer, New York, pp.137-166, ISBN: 978-1-4614-6877-6, DOI; 10.1007/978-1-4614-6877-6 5.
  • Ficanha, Evandro M., Rastgaar Aagaah, Mohammad, Kaufman, Kenton R., 2014, “Multi-axis Capability for Powered Ankle-foot Prostheses,” Neuro-Robotics: From Brain Machine Interfaces to Rehabilitation Robotics, Editor: Panagiotis Artemiadis, Springer, New York, Chapter 4, pp. 85-103, 2014. ISBN: 978-94-017-8931-8, DOI: 10.1007/978-94-017-8932-5__4.
  • Rastgaar Aagaah, Mohammad, Lee, Hyunglae, Ficanha, Evandro M., Ho, Patrick, Krebs, Hermano Igo, and Hogan, Neville, 2014, “Multi-Directional Dynamic Mechanical Impedance of the Human Ankle; a Key to Anthropomorphism in Lower Extremity Assistive Robots,” Neuro-Robotics: From Brain Machine Interfaces to Rehabilitation Robotics, Editor: Panagiotis Artemiadis, Springer, New York, Chapter 6, pp.157-178, ISBN: 978-94-017-8931-8, DOI: 10.1007/978-94-017-8932-5__6.
  • Lee, H., Ho, P., Rastgaar Aagaah, M., Krebs, H. I., and Hogan, N., 2014, “Multivariable Static Ankle Mechanical Impedance with Active Muscles,” IEEE Transaction on Neural Systems & Rehabilitation Engineering, Vol. 22(1) pp. 44-52.
  • Ficanha, E. M., Rastgaar, M., Moridian, B., and Mahmoudian, N., 2013, “Ankle Angles during Step Turn and Straight Walk: Implications for the Design of a Steerable Ankle-Foot Prosthetic Robot,” ASME Dynamic Systems and Control Conference (DSCC), Stanford University, Palo Alto, CA, 2013.
  • Lee, H., Ho, P., Rastgaar Aagaah, Mohammad, Krebs, H. I., and Hogan, N., 2011, "Multivariable Static Ankle Mechanical Impedance with Relaxed Muscles," Journal of Biomechanics, Vol. 44, No. 10, pp. 1901-1908.
  • Rastgaar Aagaah, M., Ahmadian M., Southward S. C., 2010, “Vibration Cancellation in a Plate using Orthogonal Eigenstructure Control,” ASME Journal of Applied Mechanics, 77, 061007-7.
  • Rastgaar Aagaah, M., Ahmadian, M., Southward, S. C., 2010, “Experimental Application of Orthogonal Eigenstructure Control for Structural Vibration Cancellation,” Journal of Sound and Vibration, 329(19), pp. 3873–3887.
  • Rastgaar Aagaah, M., Ahmadian, M., Southward, S. C., 2010, “Orthogonal Eigenstructure Control for Vibration Suppression,” ASME Journal of Vibration and Acoustics, Vol. 132(1), pp. 1-10.
  • Rastgaar Aagaah, M., Ho, P., Lee, H., Krebs, H. I., Hogan, N., 2010, “Stochastic Estimation of the Multi-Variable Mechanical Impedance of the Human Ankle with Active Muscles,” ASME Dynamic Systems and Control Conference (DSCC), Cambridge, MA, September 13-15, 2010.
  • Lee, H., Ho, P., Rastgaar Aagaah, M., Krebs, H. I., Hoga,n N., 2010, “Quantitative Characterization of Steady-State Ankle Impedance with Muscle Activation,” ASME Dynamic Systems and Control Conference (DSCC), Cambridge, MA, September 13-15, 2010.
  • Rastgaar Aagaah M., Ho P., Lee H., Krebs H. I., Hogan N., “Stochastic Estimation of Multi-variable Human Ankle Mechanical Impedance,” ASME Dynamic Systems and Control Conference (DSCC), Hollywood, CA, October 12-14, 2009.
  • Rastgaar Aagaah M., Ahmadian M., Southward S. C., “Orthogonal Eigenstructure Control with Non-collocated Actuators and Sensors,” Journal of Vibration and Control, 15(7), 1019-1047, 2009.

Rush D. Robinett III

  • Robinett, R.D. III and Wilson, D.G., Nonlinear Power Flow Control: Utilizing Exergy, Entropy, Static and Dynamic Stability and Lyapunov Analysis, Springer Complexity, Understanding Complex Systems, Springer-Verlag 2011.
  • Robinett III, R.D. and Wilson, D.G., “Nonlinear Slewing Spacecraft Control Based on Exergy, Power Flow, and Static and Dynamic Stability”, The Journal of the Astronautical Sciences, Vol. 57, No. 4, October-December 2010, pp. 717-741.
  • Robinett III, R.D. and Wilson, D.G., “Hamiltonian Surface Shaping with Information Theory and Exergy/Entropy Control for Collective Plume Tracing”, Invited Paper to Special Issue on “Information Processing and Decision Making in Distributed Control Systems”, International Journal of Systems, Control and Communications, Vol. 2, Nos. 1/2/3, 2010, pp. 144-169.
  • Robinett III, R.D. and Wilson, D.G., “Exergy and Irreversible Entropy Production Thermodynamic Concepts for Nonlinear Control Design”, International Journal of Exergy, Vol. 6, No. 3, pp. 357-387, 2009.

Mahdi Shahbakhti

Reza Shahbazian-Yassar

Tolou Shokuhfar

  • T. Shokuhfar, M. Kolati, T. Moser, C. Skotjo, C. Friedrich, Survivability of TiO2 Nanotubes on the Surface of Nano-Modified Bone Screws, For submittion to JOMI, (2012).
  • T. Shokuhfar, S.S. Ray, C. Skotjo, A. L. Yarin, Anti-inflammatory Drug Loaded TiO2 Nanotubes, submitted to Acta Biomateriala, (July, 2012).
  • Craig Friedrich, Reza Shahbazian Yassar, Tolou Shokuhfar, A. Asthana, Q. Gao, P.A. Heiden, "Deformation-Driven Electrical Transport in Amorphous TiO2 Nanotubes," Applied Physics A, Vol. 109, No. 1, pp.127-132, 2012-00-00
  • T. Shokuhfar, J.Y. Chang, C.K. Choi, C. Skotjo, C. Friedrich, Biophysical Evaluation of Osteoblasts on TiO2 Nanotubes, Nanomedicine: Nanotechnology, Biology, and Medicine (Dec 2011), Under revision.
  • T. Shokuhfar, J.Y. Chang, C.K. Choi, C. Friedrich, Biophysical Evaluation of Osteoblasts on TiO2 Nanotubes, submitted to Nanomedicine: Nanotechnology, Biology, and Medicine (Dec 2011), Under Revision.
  • D.H. Shin, T. Shokuhfar, C.K. Choi, S.H. Lee, C. Friedrich, Wettability changes of TiO2 nanotube surfaces, Nanotechnology, 22 (2011) 315704 -11.
  • T. Shokuhfar, Q. Gao, A. Asthana, P. Heiden, C. Friedrich, Structural Instabilities in TiO2 Nanotubes, Journal of Applied Physics, 108 (2010), 1043101-5.
  • Asthana, T. Shokuhfar, Q. Gao, P.A. Heiden, C. Friedrich, R.S. Yassar, A Real Time Observation of Phase Transition of Anatase TiO2 Nanotubes into Rutile Particles by In Situ Joule Heating Inside Transmission Electron Microscope, Advanced Science Letters, 3 (2010), 557-562.

Kazuya Tajiri

  • M. Mortazavi and K. Tajiri, “Effect of PTFE Content in Gas Diffusion Layer on Water Transport in Polymer Electrolyte Fuel Cells (PEFCs)”, Journal of Power Sources, 245, 236-244 (2014)
  • K. Tajiri, C. Y. Wang, “Cold Start of Polymer Electrolyte Fuel Cells”, Chapter 3 in Modern Aspects of Electrochemistry, vol. 49, 89-128 (2010). Edited by C. Y. Wang and U. Pasaogullari, Springer
  • X. Wang, K. Tajiri, R. K. Ahluwalia, “Water transport during startup and shutdown of polymer electrolyte fuel cell stacks”, Journal of Power Sources, 195 (19) 6680-6687 (2010)
  • K. Tajiri, Y. Tabuchi, C. Y. Wang, “Water removal from a PEFC during gas purge”, Electrochimica Acta, 53 (22) 6337-6343 (2008)
  • K. Tajiri, Y. Tabuchi, F. Kagami, S. Takahashi, K, Yoshizawa, C. Y. Wang, “Effects of operating and design parameters on PEFC cold start”, Journal of Power Sources, 165 (1) 279-286 (2007)
  • K. Tajiri, Y. Tabuchi, C. Y. Wang, “Isothermal Cold Start of Polymer Electrolyte Fuel Cells”, Journal of The Electrochemical Society, 154 (2) B147-B152 (2007)
  • X. G. Yang, N. Burke, C. Y. Wang, K. Tajiri, K. Shinohara, “Simultaneous Measurements of Species and Current Distributions in a PEFC under Low-Humidity Operation”, Journal of The Electrochemical Society, 152 (2) A759-A766 (2005)

Madhukar Vable

  • Vable, M. and Maddi J. "Boundary element analysis of bonded joints", International Journal of Adhesion and Adhesives, 26, 133- 144, 2006
  • Integrating fracture mechanics into undergraduate design." Proceedings of ASEE annual conference, Nashville, June 12-15, 2005
  • Vable, M. “Controlling errors in the process of automating boundary element method analysis.” Engineering Analysis with Boundary Elements, v26, pp. 405-415, 2002
  • Vable, M. and M.E. Fox "Tests for multiple materials problems”, Boundary Elements XXIV, eds. C.A. Brebbia, A. Tadeu, and V. Popov, pp731-740, 2002
  • Vable, M., "Mechanics of Materials," Oxford University Press, 2002.

Charles D. Van Karsen

  • Ibrahim Miskioglu, Charles D. Van Karsen, Wright-Charlesworth, D.D., King, J.A., "Nano-Scratch Testing of Short Carbon Fiber Composites to Assess Fiber Adhesion," Journal of Applied Polymer Science, Vol. 103, No. 1, pp. 328 - 335, 2007-00-00
  • Steve Mattson, Charles D. Van Karsen, Jason Blough, Mark Schiefer, "Design and Performance of a Gas Actuated Impact Hammer", 18th International Modal Analysis Conference, San Antonio, Feb 2000, pp 1466-1469
  • David E. Soine, Harold A. Evensen, Charles D. Van Karsen, "Threshold Level as an Index of Squeak and Rattle Performance", 1999 SAE Noise and Vibration Conference, Traverse City, May 1999, pp 599-604
  • Chris V. Kurmaniak, Charles D. Van Karsen, William R. Kelley, "Application of Indirect Force Estimation Techniques to the Automotive Transfer Case", 1999 SAE Noise and Vibration Conference, Traverse City, May 1999, pp 861-870
  • Myles Dexter, Harold A. Evensen, Charles D. Van Karsen, Jason Blough, "Extraction/Filtration of Transients Embedded in Stationary Signals Using Wavelets: Focus on Extraction of Frequency Response Functions", 1999 SAE Noise and Vibration Conference, Traverse City, May 1999, pp 1335-1344
  • Van Karsen, C.D., Gwaltney, G.D., Blough, J.R., Appling Transfer Path Analysis to Large Home Appliances, Proceedings: 17th International Modal Analysis Conference, Kissimmee Fl, February 1999
  • Van Karsen, C.D., Maisonville, K.D., Experimental Technique for Transverse Chain Vibration Measurements, Proceedings of the 21st International Seminar on Modal Analysis, Leuven Belgium, September 1998
  • Blough, J.R., Brown, D.L.,Van Karsen, C.D., Independent Operating Shape Determination on Rotating Machinery, Based on Order Tracked Measurements, "Proceedings: 16th International Modal Analysis Conference", Santa Barbara, CA, February 1998, Society for Experimental Mechanics, pages 1516-1525

Carl R. Vilmann

  • Yap, S. M., Vilmann, C. R., and Peach, M. O., “An Investigation Into Non-Classical Magnetoelastic Bending and Buckling of Ferromagnetic Thin Plates,” Proceedings of the 1994 Society for Experimental Mechanics Spring Conference, Baltimore, Maryland, pp. 14-22, June 6-8, 1994.
  • Vilmann, C. R., and Nagaranthal, B., “Optimal Scraper Profiles for Promoting Interfacial Fracture,” Proceedings of the 1990 Computers in Engineering Conference and Exposition, Boston, Massachusetts, pp. 225-32, Aug. 5-9, 1990.
  • Chris Passerello, Carl R. Vilmann, Lychuk, W.M., Bradley, S.A., Lee, C., , "Stress and Deformation Modeling of Multiple Rotary Combustion Engine Trochoid Housing," SAE International Congress and Exposition, Detroit, 1986., 1986-01-00 (pdf)

Song-Lin (Jason) Yang

  • Gordon Parker, Song-Lin (Jason) Yang, John H. Johnson, Singh, N., "Vehicle Engine Aftertreatment System Simulation (VEASS) Model: Application to a Controls Design Strategy for Active Regeneration of a Catalyzed Particulate Filter," SAE 2005 Transactions Journal of Fuels and Lubricants, SAE Paper No. 2005-01-0970, 2009-04-30
  • Gordon Parker, Song-Lin (Jason) Yang, John H. Johnson, Singh, N., "Vehicle Engine Aftertreatment System Simulation (VEASS) Model: Application to a Controls Design Strategy for Active Regeneration of a Catalyzed Particulate Filter," SAE 2005 Transactions Journal of Fuels and Lubricants, SAE Paper No. 2005-01-0970, 2009-04-30
  • Song-Lin (Jason) Yang, John H. Johnson, Triana, A.P., Hasan, M., "An Advanced 1D 2-Layer Catalyzed Diesel Particulate Filter Model to Simulate: Filtration by the Wall and Particulate Cake, Oxidation in the Wall and Particulate Cake by NO2 and O2, and Regeneration by Heat Addition," SAE 2006 Transactions Journal of Fuels and Lubricants, 2007-03-00
  • Song-Lin (Jason) Yang, Liew, K.H., Urip, E., "Modeling IC Engine Conjugate Heat Transfer Using the KIVA Code," Numerical Heat Transfer, Part A, Vol. 52, pp. 1-23, 2007-00-00
  • Liew, K.H., Urip, E., Yang, S.L., Marek, C.J., Mattingly, J.D., “Performance Cycle Analysis of a Two-spool Separate-exhaust Turbofan with Interstage Turbine Burner,” AIAA Journal of Propulsion and Power (to appear).
  • Yang, S.L., Siow, Y.S., Teo, C.Y., and Hanjalic, K., “A KIVA Code with Re-Stress Model for Engine Flow Simulation,” Energy—An International Journal, Vol 30, Issues 2-4, pp. 427-445, February-March, 2005.
  • Huynh, C.T., Johnson, J.H. , Yang, S.L., S.T. Bagley, and Warner, J.R., “A One-Dimensional Computational Model for Studying the Filtration and Regeneration Characteristics of a Catalyzed Wall-Flow Diesel Particulate Filter,” SAE Journal of Fuels and Lubricants, pp. 620-646, 2004 (SAE 2003 Transactions).
  • Yang, S.L., Peschke, B.D., and Hanjalic, K., “Second-Moment Closure Model for IC Engine Flow Simulation Using KIVA Code,” ASME J. of Engineering for Gas Turbines and Power, Vol. 122, pp. 355-363, 2000.